Star Micronics NX-2460C - Manual (Page 13)

Installing the paper support 7
❏ Replace the front cover of the printer. Press down on the raised parts at the
back of the cover until it snaps securely shut.
Installing the paper support
❏ Insert the ends of the paper support into the slots on the printer as shown in
the following illustration.
Connecting to your computer
The computer sends data to the printer through a cable. This printer does not
come with a cable, so you must purchase one of your own. You will probably
want to use a standard parallel cable for connection, but note that you can also
use an optional Serial-To-Parallel Interface Converter (SPC-8K).