Operator’s console pc, System administrator – Polycom SpectraLink RCO400 User Manual

Page 21

Advertising
background image

Site Preparation

PN: 1725-36122-001_N.doc

21

Operator’s Console PC

A PC must be available to perform system administration and

diagnostics The PC must conform to the following specifications:

An IBM-compatible personal computer, 486 or above (with a 16

MHz clock or faster)

A hard disk with at least 2 Mbytes free space

At least 640k bytes of RAM

MS-DOS 3.2 (or later), or MS-Windows 95 (or above) or NT

A 3 1/2” floppy-disk drive (high density, 1.44 Mbytes)

One RS-232 serial port for connection to the system controller

If remote access is required, the customer must supply an external

modem, 9600 baud or faster.

System administrator

One person (or more, depending on the size of the system) must be

designated as the system administrator for the SpectraLink 6000

System. This person is often also the company’s telephone system

administrator. This person should know the location of the company’s

current telephone equipment, have access to the telephone room,

know the telephone system’s feature codes, and should be present for

the installation. If there is not currently a person carrying out such

duties, someone must be designated as system administrator.
The system administrator’s tasks are minimal but may take up to two

hours per week for a large system. The system administrator should

have access to the location of the SpectraLink system and be

competent to perform the following functions:

Swap system components (handsets, Base Stations)

Swap an Interface Module

Perform or direct basic moves, adds and changes to a telephone

system

Perform or direct the receiving and shipping of components

Train users with video and handouts

The system administrator should be available for training at the time

of the Polycom installation. The system administrator is given

Advertising