Polycom SpectraLink 1725-36032-001 - Manual (Page 22)

SpectraLink 8000 SVP Server: Administration Guide for SRP
SendAll
In a system with multiple SVP Servers, the SendAll option is provided
to speed configuration and to ensure identical settings. The S=SendAll
option allows you to send that configuration parameter to every SVP
Server on the LAN.
SendAll can only be used after the IP address is
established on EACH SVP Server via the serial connection. If you
anticipate identical settings across the LAN, set just the IP address
and custom hostname (if desired) for each SVP Server using the initial
serial connection. Then connect via the LAN and use
SendAll to set
identical configuration options for all SVP Servers.
If
SendAll is to be utilized in your system, all passwords must be
identical. DO NOT CHANGE THE PASSWORD AT THE INITIAL
CONFIGURATION IF THE
SendAll OPTION IS DESIRED. Use the
default password and change it globally if desired after a LAN
connection is established for all SVP Servers.
If independent administration of each SVP Server is desired, the
passwords may be set at initial configuration.
The following options must be configured:
IP Address
Enter the IP address of the SVP Server, defined by your network
administrator. Enter the complete address including digits and
periods.
DHCP may be entered.
The SVP Server will automatically lock for maintenance if the IP
address is changed. When this
Maintenance Lock occurs, the SVP Server
must be reset upon exit. All active calls are terminated during a reset.
Hostname
(Optional) The name of the SVP Server to which you are connected,
for identification purposes only. You cannot enter spaces in this field.
Change the default host name, if desired.
The host names for each SVP Server and OAI Gateway on the
system must be unique.
PN: 1725-36032-001_F.doc 22