Polycom V4.0 INTEGRATION SE 200 V3.0.2/CMA - Manual (Page 7)

2-1
2
Manage Device
Add Device
1
Click Device | Admin/Monitor View, See the following drawing:
2 Click Add Device listed in Commands | Device Navigation, there will
pop-up Add New Device page.
Set information as follows:
a. Select Device Type to RMX,
b. Set IP Address to a valid IP of RMX 1000 device,
c. Set Admin ID to a valid username of the RMX 1000 device,
d. Set Password to a valid password of the RMX 1000 device,
See the following drawing: