Anritsu 0701012 - Manual (Page 22)

Menu Bar Using the Power Sensor
3-4 MA24106A UG
3-7 Menu Bar
The Menu Bar contains the following menus:
File Menu
The File menu contains the Exit command, which terminates the application.
Tools Menu
The Tools menu contains:
• Reset Averages: Restarts the averaging
• Clear Fixed Offset: Removes the offset value and displays the absolute power being measured at the
sensor RF port
• High Aperture Time: When High Aperture Time mode is selected, the sensor provides more accurate
measurements of TDMA signals. In this mode, the ADC acquisition time is increased and the display
update rate is decreased. This mode can be useful when measuring low power, modulated signals, and
when changing between ranges.
• Upgrade Firmware: Launches the firmware upgrade sequence. Refer to Appendix D for a procedure on
upgrading the firmware.
• Connected to COM Port Number: Displays the COM port number that is currently assigned to the
power sensor.
Figure 3-6. File Menu
Figure 3-7. Tools Menu