Configure the ip address – HP LaserJet Enterprise 600 Printer M603 series User Manual
Page 79
Advertising
Install the product on a wired network with Windows
Configure the IP address
1.
Connect the network cable to the product and to the network.
2.
Wait for 60 seconds before continuing. During this time, the network recognizes the product and
assigns an IP address or host name for the product.
3.
At the product control panel, press the Home button.
4.
Open the following menus:
●
Administration
●
Reports
●
Configuration/Status Pages
●
Configuration Page
ENWW
Connect to a network with Windows
63
Advertising
This manual is related to the following products: