HP Storage Mirroring V5.1 Software - Manual (Page 194)

20 - 15
E-mail notification
The E-mail Notification tab allows you to specify e-mail notification settings. When enabled, the
messages logged to the Windows Event Viewer will be sent as e-mail messages to the addresses
specified. The subject of the e-mail will contain an optional prefix, the server name where the Event
Viewer message was logged, the Event Viewer ID, and the severity level (information, warning, or
error). The text of the Event Viewer message will be displayed in the body of the e-mail message.
In order to enable e-mail notification, the server must have Internet Explorer 5.0 or later.
Select or deselect Enable notification to turn this feature on or off. Any notification settings
specified are retained when Enable notification is disabled.

Mail Server (SMTP)—Specify the name of your SMTP mail server.

Log on to SMTP Server—If your SMTP server requires authentication, enable Log on to SMTP
Server and specify the Username and Password to be used for authentication. Your SMTP
server must support the LOGIN authentication method to use this feature. If your server supports
a different authentication method or does not support authentication, you may need to add the
Storage Mirroring server as an authorized host for relaying e-mail messages. This option is not
necessary if you are sending exclusively to e-mail addresses that the SMTP server is responsible
for.

From Address—Specify the e-mail address that you want to appear in the From field of each
Storage Mirroring e-mail message. The address is limited to 256 characters.

Send To—Specify the e-mail address that each Storage Mirroring e-mail message should be sent
to and click Add. The e-mail address will be inserted into the list of addresses. Each address is
limited to 256 characters. You can add up to 256 e-mail addresses. If you want to remove an
address from the list, highlight the address and click Remove. You can also select multiple
addresses to remove by Ctrl-clicking.

Subject Prefix and Add event description to subject—The subject of each e-mail notification
will be in the format Subject Prefix : Server Name : Event Message Severity : Event Message ID
: Event Message Description. The first and last components (Subject Prefix and Event Message
Description) are optional. The subject line is limited to 150 characters.
If desired, enter unique text for the Subject Prefix which will be inserted at the front of the
subject line for each Storage Mirroring e-mail message. This will help distinguish Storage
Mirroring messages from other messages. This field is optional.