HP StorageWorks 1200 All-in-One Storage System - Manual (Page 86)

1. Use the Command Line interface (CLI) found at C:\Program Files\HP\HP All-in-One
Storage Manager\hpkacli.exe
.
The password may be set interactively, allowing the password characters to be masked, or it
may be set with a single command.
2. Use the following command to display usage details:
> hpkacli /?
To specify a password
1. Type the following:
> hpkacli set password
2. This will bring up the following:
Current password for ASMbackup:
New password for ASMbackup:
Confirm new password for ASMbackup:
3. If the current password for ASM backup is blank, press return when prompted. Otherwise, enter
the current password.
4. Confirm the new password by typing in password again under Confirm new password.
5. The password has been set.
Using the Administrators' account to change the ASMbackup password
1. Type in the following:
> hpkacli set password/admin
2. This will bring up the following:
Password of Admin user:
New password for ASMbackup:
Confirm new password for ASMbackup:
3. Type the Data Protector Express admin password.
4. Type in the new password for the ASMbackup account.
5. Confirm the new password by typing it in again.
6. The password has been set.
Installing Data Protector Express on other devices
The Data Protector Express installation on the All-in-One System acts as the master server for a Data
Protector Express Management Domain. If you wish to use the All-in-One system as a Disk-To-Disk
(D2D) backup target for other client or machines, you may install Data Protector Express on those
machines and join the management domain.
NOTE:
Installing Data Protector Express on other servers is not required to backup Exchange, SQL Server, or
User-Defined applications, when those applications are hosted by All-in-One Storage Manager. The
instructions provided here are only needed if a user wishes to use AiO as a backup target for additional
user data in their environment.
Data protection 86