Controller, Chassisname, Clearconfigurationwithdataloss – HP Linux Server Management Software User Manual
Page 41: Licensekey, deletelicensekey, Preferredpathmode
Toolkit utilities 41
•
RebuildPriority ("
RebuildPriority, ExpandPriority
" on page
•
•
•
WriteCache ("
" on page
Controller
You must enter a value for this option because it identifies the controller that you want to configure:
•
All—Configure all detected controllers in the system.
•
Slot [N][:M]—Configure the internal controller in slot number N, or the external controller at port
M in slot N.
•
WWN [N]—Configure the external controller that has the World Wide Name N.
•
SerialNumber [N]—Configure the shared storage controller that has serial number N.
•
IOCabinet[N],IOBay[N],IOChassis[N],Slot[N],Cabinet[N],Cell[N]—Configure
the controller in the Integrity server that has the slot path information defined by this sequence of
identifiers.
ChassisName
Enter the user-defined character string that identifies the controller. Any of the following characters can be
used in the string:
a–z, A–Z, 0–9, !, @, #, *, (, ), ,, -, _, +, :, ., /, [space]
You do not need to use quotation marks around the string, but doing so allows the string to begin with a
space character. However, the string cannot end with a space character.
Currently, only shared-storage controllers such as the RA4x00, MSA1000, and Smart Array Cluster Storage
support the ChassisName option. The RA4x00 controller uses a 24-character string, while other applicable
controllers use a 20-character string.
ClearConfigurationWithDataLoss
This command is now deprecated.
The default value for this option is No. Clearing the configuration causes data loss because it deletes all
logical volumes and arrays on the controller. If you clear a configuration, you can write commands later in
the script file to create a new configuration from the liberated drive capacity.
LicenseKey, DeleteLicenseKey
These options enable you to enter a 25-character license key to activate or uninstall some controller features.
Hyphens can be entered, but are not required.
PreferredPathMode
The setting that you select for this option determines how the preferred I/O path to a particular logical drive
is set for a redundant array controller that is in an active/active configuration.
Not all controllers support this feature, and controllers in an active/standby configuration disregard this
option.