Dascom 2600 User Guide - Manual (Page 63)

Tally Dascom 2610
50
6.3.3 Access to WebPanel
Once an IP address has been set up, you can access WebPanel by typing the printer's IP
address into your browser address box.
The current status of your printer is displayed on the right hand side of the screen. This is
refreshed every 20 seconds, whenever you refresh the page or click Printer Status. The left
side allows you to query the printer, configure it and access network options.
If you try to access the printer after power on the printer it may last up to one
minute until the printer is visible in the network.
6.3.4 Printer Status
Selecting this option refreshes the status display. Displayed on this page are:
◆ Processing state
◆ Loaded menu
◆ Error state
◆ Firmware level
◆ Serial number
◆ Asset number
◆ Panel lock status
Options to change the Online / Offline state, network configuration and the virtual control
panel for your printer are all accessed from this page.