Rear window features — hard top only, Rear window wiper/washer — if equipped, Rear window wiper/washer – Jeep 2012 Wrangler Unlimited - Owner Manual User Manual

Page 262: If equipped

Advertising
background image

REAR WINDOW FEATURES — HARD TOP ONLY

Rear Window Wiper/Washer — If Equipped
A rotary switch on the center portion of the control lever
(located on the right side of the steering column) controls
the operation of the rear wiper/washer function.

Rotate the switch upward to the first detent posi-
tion for rear wiper operation.

Rotate the switch upward past the first detent to
activate the rear washer. The washer pump and the
wiper will continue to operate as long as the switch

is held. Upon release, the wiper will cycle two to three
times before returning to the set position.

If the rear wiper is operating when the ignition is turned
to the LOCK position, the wiper will automatically return
to the “Park” position. When the vehicle is restarted, the
wiper will resume function at whichever position the
switch is set at.

Rear Wiper/Washer Control

260

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Advertising
This manual is related to the following products: