Lynx Studio Hilo Version 5 Firmware - Manual (Page 11)

6. The Hilo LCD screen will display a warning screen that reads “Do not turn off the computer or the Hilo
during the firmware updater process”. There is also a progress bar.
7. When the Update is complete, you will be instructed to power down Hilo. Turn off the front panel standby
switch. Then turn off the rear panel power switch. Wait three seconds, then power Hilo back up.
8. Now we need to update the LT-USB card inside of Hilo. Launch the Hilo Update application again. This time
from the “Select Unit to Update” drop-down menu, choose “LT-USB”
9. Verify that the New Firmware Version is higher than the Current Firmware Version. If so, click “Update”
10. When the updater is complete, close the pop-up window in your computer. Again, power cycle Hilo using the
front panel standby switch, the rear panel power switch, wait three seconds, then turn the unit back on.