Camera error messages – HP M540 Series User Manual

Page 39

Advertising
background image

My camera shuts down unexpectedly.

A power surge or electrostatic discharge may have affected the camera. Remove the
batteries and reset the camera (see

“Resetting the camera” on page 32

). Then

reinstall the batteries and turn on the camera.

Recharge the batteries.

Connect the camera to AC power via an optional HP Photosmart dock, then turn on
the camera.

Replace the batteries.

I am having a problem installing or using the HP Photosmart Software.

Make sure your computer meets the minimum system requirements as stated on the
camera packaging.

Refer to the HP Photosmart Software online help system.

Refer to the Hewlett-Packard Technical Support website:

www.hp.com/support

.

Camera error messages

Should you receive one of the following error messages when using your camera, you
can look up details about the message by visiting

www.hp.com

and searching on the

specific code.

Lens Error (general)—M440–021

Lens Error (zoom cannot retract)—M440–022

Lens Error (lens cannot extend)—M440–033

Lens Error (zoom in failed)—M440–041

Lens Error (zoom out failed)—M440–081

Unsupported card—M440–200

Unable to format card—M440–202

Error saving image—M440–100

Error saving video—M440–102

Batteries Low (followed by data on battery types and performance)—AA–400

37

Advertising
This manual is related to the following products: