Document Outline

• 8400 protec - PROFINET
  • Contents
    • 1 About this documentation
      • 1.1 Document history
      • 1.2 Conventions used
      • 1.3 Terminology used
      • 1.4 Notes used
    • 2 General information
    • 3 Technical data
      • 3.1 General data and operating conditions of the PROFINET
      • 3.2 Protocol data
      • 3.3 Communication time
      • 3.4 Internal switch latency
    • 4 Installation
      • 4.1 Network topology
      • 4.2 PROFINET connection
        • 4.2.1 PROFINET connection via the RJ45 socket
          • 4.2.1.1 Pin assignment
          • 4.2.1.2 Specification of the Ethernet cable
        • 4.2.2 PROFINET connection via the M12 socket
    • 5 Commissioning
      • 5.1 Before initial switch-on
      • 5.2 Configuring the PROFINET IO controller
      • 5.3 Setting the station name
      • 5.4 Setting the IP configuration
      • 5.5 Initial switch-on
    • 6 Data transfer
    • 7 Process data transfer
      • 7.1 Accessing process data / PDO mapping
      • 7.2 Preconfigured port interconnection of the process data objects (PDO)
      • 7.3 Freely configuring the port interconnection of the process data objects (PDO)
    • 8 Parameter data transfer
      • 8.1 The acyclic channel (PROFIdrive profile)
        • 8.1.1 Connection establishment of an IO controller to an IO device
        • 8.1.2 Acyclic data transmission process
        • 8.1.3 Structure of the PROFINET data telegram
      • 8.2 Reading parameters from the controller
        • 8.2.1 Response after a correct read request
        • 8.2.2 Response after a read error
        • 8.2.3 Telegram example: Read request
      • 8.3 Writing parameters to the controller
        • 8.3.1 Response after a correct write request
        • 8.3.2 Response after a write error
        • 8.3.3 Telegram example: Write request
      • 8.4 Error information (error)
      • 8.5 Consistent parameter data
    • 9 PROFIsafe
    • 10 Monitoring
    • 11 Diagnostics
      • 11.1 LED status displays
      • 11.2 Diagnostics with the »Engineer«
      • 11.3 Diagnostic data
    • 12 Error messages
      • 12.1 Short overview (A-Z) of the PROFINET error messages
      • 12.2 Possible causes and remedies
        • PROFINET: Exist. conn. to 8400 lost [0x01bc3100]
        • PROFINET: Memory: No access [0x01bc5531]
        • PROFINET: Memory: Read error [0x01bc5532]
        • PROFINET: Memory: Write error [0x01bc5533]
        • PROFINET: Restart by watchdogreset [0x01bc6010]
        • PROFINET: Internal error [0x01bc6011]
        • PROFINET: Internal error [0x01bc6100]
        • PROFINET: Internal error [0x01bc6101]
        • PROFINET: Invalid parameter set [0x01bc641f]
        • PROFINET: Error: Lenze setting loaded [0x01bc6420]
        • PROFINET: Invalid module configuration [0x01bc6430]
        • PROFINET: Record parameter: Invalid read [0x01bc6501]
        • PROFINET: Record parameter: Invalid write [0x01bc6502]
        • PROFINET: Data output status bad [0x01bc6503]
        • PROFINET: Data_Exchange status quit [0x01bc6531]
        • PROFINET: Station name error [0x01bc6532]
        • PROFINET: IP address error [0x01bc6533]
        • PROFINET: Stack init error [0x01bc6534]
        • PROFINET: Safety communication timeout [0x01bc6610]
        • PROFINET: Safety parameter timeout [0x01bc6611]
        • PROFINET: Safety init error [0x01bc6612]
        • PROFINET: Safety connect error [0x01bc6613]
        • PROFINET: Internal error [0x01bc6650]
    • 13 Parameter reference
      • 13.1 Parameters relevant for communication
        • C13000 | IP address
        • C13001 | Subnetwork mask
        • C13002 | Gateway address
        • C13003 | Physical address
        • C13010 | Active IP address
        • C13011 | Active subnetwork mask
        • C13012 | Active gateway address
        • C13850 | All words to master
        • C13851 | All words from master
        • C13852 | All words to standard device
        • C13853 | All words from standard device
        • C13860 | Settings
        • C13861 | Bus status
        • C13862 | Bus counter
        • C13864 | Active station name
        • C13865 | Display: Most recent safety PRM data
        • C13867 | Display: Most recent diagnostic data
        • C13877 | Bus error(1)
        • C13878 | Bus error(2)
        • C13880 | Reaction on communication failure
        • C13881 | Reaction time delay
        • C13885 | Clear process data
        • C13887 | Suppress signalling diag. mess. upon
        • C13899 | Station name
        • C13900 | Firmware product type
        • C13901 | Firmware compilation date
        • C13902 | Firmware version
        • C13910 | I&M1 system designation
        • C13911 | I&M1 installation site
        • C13912 | I&M2 installation date
        • C13913 | I&M3 additional information
        • C13914 | I&M4 signature code
      • 13.2 Table of attributes
    • 14 Index