Michelin Navigation - Manual (Page 78)

- The square at the top left of the screen shows the next change of direction and the
distance to that change of direction.
- The 3 top fields show, depending on the setting:
- The " Distance remaining "
- The "
Time remaining
"
- The " Arrival time "
- The "
Time
"
- The " Speed "
- The "
Direction
"
To choose which information to show, click on one of the positions, then click on
the position you want to change. Then select the indicator you want.
- The name of the road you need to take at the next direction change.
•
On the map:
- The (+) and (-) buttons to zoom in and out.
•
Under the map:
- On the left:
the number of satellite the GPS is using to determine your position.
- In the middle: the name of the street you are on.
8.3. “*.asc” files
•
To create an "asc" file to add to your ViaMichelin Navigation X-930, follow the
instructions below:
•
You have to create an "asc" file for each type of saved item to be imported (which also
means you can subsequently delete saved addresses solely for a given category).
•
On your PC:
•
Create a text file.
•
Open this text file and create your saved addresses as follows:
- Each line must contain information on a single saved item only and use the following
syntax:
- [Longitude],[Latitude],["Name"],
- (for example: 2.142436 , 48.835248 , "Le Carrefour Restaurant" )
- The separator is the comma " , "
- The name must be in quotation marks " "
- Lines preceded by a semi-colon "; " are comment lines
- Longitude and Latitude must be given in degrees and fractions of degrees.
•
Rename the text file using "asc" as the extension: e.g.: " MyRestaurants.asc "
74