MRV Communications EM316-2SFP - Manual (Page 41)

EM316-2SFP User Guide
P/N 1259003-001 Rev C3
32
4.4.6.3 “ show ”
The show command displays management and system information related to the
EM316LNXNM-OT management module, the hosting chassis, other modules in the chassis,
and ports available within the managed system. The arguments (parameters) following the
show
command and the operational context displayed by the system prompt control the
many functions available through this command.
The next box displays the CLI help for the show command in the slot-level context of the
2SFP modules. The first command (shown in bold) is “show?” and the second command
(also in bold) is “show ?”. The subtle difference between the two commands is the space
separating the command from the “?” in the second command.
The box below illustrates the show command applied with no arguments in the slot-level
context of a 2SFP module.
fiberdriver(slot/1.8)# show?
show Show basic info
fiberdriver(slot/1.8)# show ?
<cr> Show basic info
config Show administrative configuration for this object
defaults Show default configuration for this object
digital-diagnostics Show Digital Diagnostics summary
redundancy Show slot redundancy configuration
running-config Current operating configuration
statistics Show port info
fiberdriver(slot/1.8)# show
fiberdriver(slot/1.1)# show
Slot: 1.1
Model: EM316-2SFP
Name: EM316-2SFP at 1.1
Hardware Revision: 1
Sw Configurable: yes Operation Type: converter
Number Of Ports: 2
Port Enable Link LIN DDiags WL(nm) Name
===== ====== ============= ====== ====== ====== ============
1.1.1 enable signal Detect enable Ok 850 SFP-port1
1.1.2 enable signal Detect enable Ok 850 SFP-port2
fiberdriver(slot/1.1)#