7 set the remote code – Motorola S803 User Manual
Page 34
34
Using your Answering Machine
The correct sequence of 3 security PIN digits needs to be
detected within 5 seconds before entering remote access
mode. Random digits detected prior to the correct 3 digits
sequence are ignored, and answering machine recording
continues until the complete PIN is detected. There is no
system prompt to enter the remote access code.
Press the following keys on your handset to carry out your
desired function after entering remote access mode.
8.4.7
Set the remote code
This is used to change the remote access PIN if necessary.
1. Press
P
and
,
to select
Answer Machine
.
2. Press
P
and
,
to select
Remote Code
.
3. Press
P
and enter the 3-digit remote code.
4. Press
P
to save.
Press...
To...
1
Repeat message
2
Play/Stop message
3
Skip forward to the next message
4
Toggle Answer Off/Announce Only/
Announce and Record modes
7
Listen to the Main Menu (for Full Voice
prompts only)
0
Delete message