Perle Systems DS1 - Manual (Page 104)

Time Commands
104 IOLAN Device Server User’s Guide, Version 1.0
Logging Commands
Set Syslog
Description Configures the system log.
User Level Admin
Syntax
Options level
primary-host
secondary-host
Show Syslog
Description Shows the syslog settings.
User Level Admin
Syntax
Time Commands
Set Time
Description Sets the Device Server’s system clock.
User Level Admin
Syntax
Option
<hh:mm[:ss]>
Sets the Device Server’s system time, using military time format.
Show Time
Description Shows the Device Server’s system clock.
User Level Normal, Admin
Syntax
set syslog
[level emergency|alert|critical|error|warning|notice|info|debug]
[primary-host <config_host>] [secondary-host <config_host>]
Choose the event level that triggers a syslog entry:
z Emergency
z Alert
z Critical
z Error
z Warning
z Notice
z Info
z Debug
When you select a Level , all the levels that appear above it in the list also trigger a
syslog entry. For example, if you select Error , all Error , Critical , Alert , and Emergency
events will be logged.
The first preconfigured host that the Device Server will attempt to send system log
messages to; messages will be displayed on the host’s monitor.
If the Device Server cannot communicate with the primary host, then the Device Server
will attempt to send system log messages to this preconfigured host; messages will be
displayed on the host’s monitor.
show syslog
set time <hh:mm[:ss]>
show time