NEC NEAX2000 IVS ND-45492 - Manual (Page 44)

ND-45492 (E) CHAPTER 3
Page 27
Revision 2.0
(4) Secure the PIM to the RACK PARTS as shown in Figure 003-5 by tightening the 4 screws already mounted
in the RACK PARTS. When the system is a multiple-PIM configuration, secure all PIMs and RACK
PARTS.
Figure 003-5 Connection of the PIM and the RACK PARTS
NAP 200-003
Sheet 5/37
Installation of Main Equipment
REAR
BASE
PIM
Note: The Battery Module (BATM) and/or
the MDF Module (MDFM) can be in-
stalled in the same manner as the PIM.