Figure 10 internet connection with enet encap, Table 8 internet connection with enet encap – ZyXEL Communications ADSL 2+ Gateway P-660HW-T1 User Manual

Page 57

Advertising
background image

P-660H/HW/W-T Series User’ Guide

57

Chapter 3 Wizard Setup for Internet Access

Figure 10 Internet Connection with ENET ENCAP

The following table describes the fields in this screen.

Back

Click Back to go back to the first wizard screen.

Next

Click Next to continue to the next wizard screen.

Table 8 Internet Connection with ENET ENCAP

LABEL

DESCRIPTION

IP Address

A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not

fixed; the ISP assigns you a different one each time you connect to the Internet.
Select Obtain an IP Address Automatically if you have a dynamic IP address;

otherwise select Static IP Address and type your ISP assigned IP address in the IP

Address text box below.

Subnet Mask

Enter a subnet mask in dotted decimal notation.
Refer to the appendices to calculate a subnet mask If you are implementing subnetting.

ENET ENCAP

Gateway

You must specify a gateway IP address (supplied by your ISP) when you use ENET

ENCAP in the Encapsulation field in the previous screen.

Network

Address

Translation

Select None, SUA Only or Full Feature from the drop-sown list box. Refer to the NAT

chapter for more details.

Back

Click Back to go back to the first wizard screen.

Next

Click Next to continue to the next wizard screen.

Table 7 Internet Connection with RFC 1483 (continued)

LABEL

DESCRIPTION

Advertising