ZyXEL Communications ZyXEL ExpWave 240B - Manual (Page 52)

ExpWave 240B Secure Outdoor Ethernet Radio Link
7-2 Network Setup
Table 7-2 VPN security level
VPN Level Authentication Encryption
None None None
Low MD5 None
Medium MD5 DES
High MD5 3DES
7.2 SMT 6.1 Menu in Router Mode
Figure 7-2 AC LAN DHCP Setup
Table 7-3 AC LAN DHCP Setup Menu Fields
FIELD DESCRIPTION EXAMPLE
DHCP This field enables/disables the DHCP server.
If set to Server, your ExpWave will act as a DHCP server.
If set to None, the DHCP server will be disabled.
When set to Server, the following items need to be set: Server
(default)
Client IP Pool
Starting Address This field specifies the first of the contiguous addresses in the
IP address pool. 192.168.1.33
Size of Client IP
Pool This field specifies the size, or count, of the IP address pool. 32
Primary DNS Server
Secondary DNS
Server Enter the IP addresses of the DNS servers. The DNS servers
are passed to the DHCP clients along with the IP address and
the subnet mask. Leave these entries at 0.0.0.0 if they are
provided by an Internet DHCP server.
Menu 6.1 - ACx LAN DHCP Setup
DHCP= Server
Configuration:
Client IP Pool Starting Address= 192.168.223.33
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
IP addresses
of the DNS
servers
Size of the IP
Pool
First address
in the IP Pool