Zebra 105SL - Manual (Page 24)

Printer Setup
Before You Begin 16
11342L-001 Rev. A 105SL User Guide 6/30/06
Before You Begin
Review this checklist, and resolve any issues before you set up or use your printer.
‰ Unpack and Inspect the Printer Have you unpacked the printer and inspected it for
damage? If you have not, see Unpack and Inspect the Printer on page 17 .
‰ Select a Site Have you selected an appropriate location for the printer? If you have not,
see Select a Site for the Printer on page 18 .
‰ Attach a Power Cord Do you have the correct power cord for your printer? If you are
unsure, see Power Cord Specifications on page 24 . To attach the power cord and connect
the printer to a power source, see Connect the Printer to a Power Source on page 23 .
‰ Connect to a Data Source Have you determined how the printer will connect to a
data source (usually a computer)? For more information, see Select a Communication
Interface on page 19 .
‰ Select Media Do you have the correct media for your application? If you are unsure,
see Types of Media on page 25 .
‰ Select Ribbon Do you need to use ribbon, and is the appropriate ribbon available, if
needed? If you are unsure, see Ribbon Overview on page 27 .