Extron Electronics DSC HD-3G A User Guide - Manual (Page 50)

X1% = Picture adjustment — 0 to 127 (default 64 )
Response is 3 digits, padded with zeros.
X1^ = Horizontal and vertical position
• H range: -02048 through +02048
• V range:
DSC 3G-HD A:-01200 through +01200
DSC HD-3G A: -1080 through +1080
Response is 5 digits with leading + or - and padded with zeros. (Example: -1075)
X1& = Horizontal and vertical size
• H range: 00010 through 04096
• V range:
DSC 3G-HD A: 00010 through 02400
DSC HD-3G A: 00010 through 02160
Response 5 digits, padded with zeros. (Example: -1075)
X2) = Output resolution
DSC 3G-HD A:
1 = EDID of the connected HDMI display. Holds last connected display EDID until a new
display is attached or a power cycle occurs. Valid for EDID export only.
2 = Custom output rate 1
3 = Custom output rate 2
4 = Custom output rate 3
9 = Match the input rate. (If the current input is not a valid output resolution, the output
rate defaults to 720p @ 60 Hz.)
SIS Variables for DSC 3G-HD A Resolutions and Refresh Rates ( X2) = 11 through 92)
Resolution 23.98 Hz 24 Hz 25 Hz 29.97 Hz 30 Hz 50 Hz 59.94 Hz 60 Hz
640x480 11
800x600 14
1024x768 20
1280x768 29
1280x800 32
1280x1024 35
1360x768 41
1366x768 47
1440x900 53
1400x1050 56
1600x900 58
1680x1050 60
1600x1200 62
1920x1200 64
480p 65 66
576p 67
720p 68 69 70 71 72 73*
1080i 74 75 76
1080p 77 78 79 80 81 82 83 84
2048x1080 (2k) 85 86 87 88 89 90 91 92
*Default output resolution
DSC 3G-HD A and DSC HD-3G A • Remote Configuration and Control 44