Auto-image commands – Extron Electronics DSC HD-3G A User Guide User Manual

Page 55

Advertising
background image

Command and Response Table for SIS Commands

Command

ASCII Command

(Host to Scaler)

Response

(Scaler to Host)

Additional Description

Input Configuration

Input Video Format

View video format:
DSC 3G-HD A

1 * \

X@

]

In verbose modes 2 and 3:
Vtyp 1 *

X@

]

View the detected input video
format

X@

of DSC 3G-HD A.

View video format:
DSC HD-3G A

1 * \

X#

]

In verbose modes 2 and 3:
Vtyp 1 *

X#

]

View the detected input video
format

X#

of DSC HD-3G A.

Input EDID (DSC HD-3G A Only)

Assign EDID to input

E

A *

X2!

EDID

}

Edid A 1 *

X2!

]

Assign EDID resolution
and refresh rate

X2!

to the

DSC HD-3G A input.

View assigned EDID
data

E

A 1 EDID

}

X2!

]

In verbose modes 2 and 3:
Edid A

X2!

]

View assigned EDID resolution
and refresh rate

X2!

for the

DSC HD-3G A input.

Auto-Image

Execute

A

Img

]

Perform an Auto-Image on the
current input (follows current
aspect ratio setting).

Execute and Fill

1*A

Img1

]

Perform an Auto-Image and fill
entire display screen.

Execute and Follow

2*A

Img2

]

Perform an Auto-Image and
follow the aspect ratio of the
input.

Active Pixels

View

E

APIX

}

X*

]

In verbose modes 2 and 3:

Apix1 *

X*

]

Show active pixels

X*

for the

input.

X*

is 4 digits padded

with zeros.

Active Lines

View

E

ALIN

}

X(

]

In verbose modes 2 and 3:

Alin1 *

X(

]

Show active lines

X(

for the

input.

X(

is 4 digits padded

with zeros.

NOTE:

X@

= Input video format for DSC 3G-HD A: 0 = No signal, 1 = SD: 480i, 2 = SD: 576i,

3 = HD: 480p, 576p, 720p, 1080i, 1080p (up to 30 Hz), 4 = 3G: 1080p (@50, 59.94, and 60 Hz), 2k

X#

= Input video format for DSC HD-3G A: 0 = No signal, 1 = HDMI, 2 = DVI, 3 = Invalid signal

X*

= Active pixels: For DSC HD-3G A, ±512 of the default value.

X(

= Active lines: For DSC HD-3G A, ±256 of the default value.

X2!

= EDID emulations for DSC HD-3G A: 0 = Automatic: matches current output resolution (default),

1 = Custom EDID 1, 2 = Custom EDID 2, 3 = Custom EDID 3, 9 = Match the input rate.

For variables 11-96, see the

SIS EDID table

on page 45.

DSC 3G-HD A and DSC HD-3G A • Remote Configuration and Control

49

Advertising
This manual is related to the following products: