HP Storage Essentials NAS Manager Software - Manual (Page 64)

Discovering NAS Devices, Tape Libraries, Switches and Storage Systems 32
Step 1 - Discover Switches
This section describes the following:
• ” SMI-S Switches Must Be Removed and Rediscovered After Upgrading ” on page 33
• ” Discovering Brocade Switches ” on page 34
• ” Discovering CNT Switches ” on page 38
• ” Discovering Cisco Switches ” on page 40
• ” Discovering Sun StorEdge and QLogic Switches ” on page 42
• ” Changing the SNMP Trap Listener Port for Sun StorEdge Switches ” on page 44
• ” Discovering McDATA and EMC Connectrix Switches ” on page 45
• ” (Discovery from SE Only) Excluding McDATA and EMC Connectrix Switches from Discovery ”
on page 55
The following table provides an overview of the discovery requirements for switches.
Table 6 Discovery Requirements for Switches
Element Discovery Requirements Additional Information
Brocade switches
(Fabric Access API)
Enter the IP address/DNS name,
user name and password of the
Brocade switch to discover it. The
user name (default admin) and
password must be for the Admin
Account.
See ” Discovering Brocade
Switches ” on page 34.
Brocade switches
(SMI-S*)
Enter the IP address/DNS name,
user name and password of the
Brocade SMI-S proxy server to
discover it. The user name (default
admin) and password must be for
the Admin Account. Note that
some SMI-S providers require you
to specify the server using its IP
address: http://IPADDRESS.
See ” Discovering Brocade
Switches ” on page 34.
CNT switches Enter the IP address and the port
number for the InVsn Software that
manages the switch as well as the
user name and password.
See ” Discovering CNT Switches ”
on page 38.
Cisco switches
(SMI-S)*
Enter the IP address/DNS name of
the Cisco switch as well as the user
name and password of the switch.
All SMI-S switches require a user
name and password.
See ” Discovering Cisco Switches ”
on page 40.