HP Integrity NonStop H-Series - Manual (Page 35)

Operating the 5258ACL Tape Drive
5258ACL Installation and User’s Guide — 522345-001
3 -7
Selecting Control Panel Display Modes
Fault Screen
When a fault is detected, a screen similar to Figure 3-6 appears. At the same time, either
the Drive Fault or the Loader Fault LED is illuminated.
Figure 3-6. Fault Screen
The first line in Figure 3-6 shows a numerical fault symptom code (FSC). The second
line shows a brief description of the error, in place of the words 'Error Description.' The
third and fourth lines contain a one-line or two-line message describing the initial error
recovery procedure (ERP).
Selecting Control Panel Display Modes
As previously described, the POST screens, the Initialization screen and the Default
screen appear without operator or host intervention. The Fault screens appear whenever
a fault occurs. The screens that follow appear in response to operator actions.
Fault Code: XXXX
Error Description
ERP line 1
ERP line 2