Apple Color LaserWriter 12/600 PS User Manual
Page 48
14
Eject
LaserWriter Disk 2 for Windows 95 and insert LaserWriter Disk 3 for Windows 95.
The PostScript PPD files are located on LaserWriter Disk 3 for Windows 95.
15
Choose a: or b: (depending on which drive holds your installation disk) from the Drives
list box.
16
Select Apple Color LW 12/660 PS from the PostScript Printer Drivers Available list and
click Next.
17
Select LPT1 if the Color LaserWriter 12/660 PS is connected to your local computer.
18
Click Next.
The Add Printer dialog box appears.
19
Name your printer and select other options as necessary.
20
Click Next.
The printer Properties dialog box appears.
21
Click OK to dismiss the Properties dialog box.
A message appears telling you that the driver software was successfully
installed.
22
Click Add Another to install another Apple LaserWriter printer. Repeat for each printer
you want to install.
You can install other Apple LaserWriter printers supported by the software.
23
When you’re done, click Exit.
Installation is complete.
24
Choose how to proceed:
For users connected via the parallel cable, the default printer driver settings
should suffice.
For instructions on using the Apple Printer Utility for Windows, see “Setting
Additional Parameters With the Apple Printer Utility for Windows,” in
Chapter 3 of the Color LaserWriter 12/600 PS User’s Manual.
To configure your printer software with NetWare, see “Initial Novell NetWare
Setup,” later in this chapter.
34
Chapter 3