Konica Minolta bizhub C451 - Manual (Page 106)

C550/C451 2-91
Administrator Operations 2
Adm
inist
rat
o
r Op
era
tions
Chapter 2
<From PageScope Web Connection>
0 For the procedure to call the Admin Mode to the display, see "Accessing the Administrator Settings"
on page 2-2.
1
Start PageScope Web Connection and access the Admin Mode.
2
Click the [Network] tab.
3
Click the [SNMP Setting] menu.
4
Enter the auth-password and priv-password in the boxes marked by the rectangle, that is, the Write
side SNMP v3 Setting.
5
Click the [OK].
? What happens if the auth-password and priv-password entered does not meet the requirements of
Password Rules?
% If the auth-password and priv-password entered does not comply with the Password Rules, a
message appears that tells that the auth-password and priv-password entered cannot be used.
Enter the correct auth-password and priv-password. For details of Password Rules, see "Password
Rules" on page 1-8.