Konica Minolta FK-502 - Manual (Page 430)

Reports and Lists 11
C451 11-7
2
Note
Some items may not be described depending on the optional settings.
Auto Printing
Interval at which the communication management report is printed can be
set in [Report Setting] of the Utility mode.
!
Detail
For [Report Settings], refer to “Specifying the printing methods for report
(Report Setting)” on page 10-92.
Manual Printing
Can be printed as follows.
1
Touch [Job List].
2
Touch [Job Details].
3
Touch [Send].
FME Frame Erase transmission
CALL Manual communication
FWD Forward
BND Binding Position
FCODE F-code specifications
RLY Relay
BUL Bulletin board