AEG MC2664E-W - Manual (Page 28)

28 Installation
INSTALLATION
Installing the appliance
1. Remove all packaging and check carefully for any signs of
damage.
2. This oven is designed to fit into a 360mm high cupboard as
standard.
When fitting into a 350mm high cupboard:-
Unscrew and remove the 4 feet from the bottom of the oven.
There are 3 tall feet and 1 short foot. Replace the 3 tall feet
with those provided in the accessory pack. Do not replace the
short foot.
3. Fit the appliance into the kitchen cupboard slowly, and
without force, until the front frame of the oven seals against
the front opening of the cupboard.
4. Ensure the appliance is stable and not leaning. Ensure that a
4mm gap is kept between the cupboard door above and the
top of the frame (see diagram).
Fixing Option 1:
Fix the oven in position with the screws provided. The
fixing points are located on the top and bottom corners
of the oven.
Fixing Option 2:
Please see the template sheet supplied with this oven.
E
D
Position A Position B
Position C
Position D
Conventional
oven
A 560 x 550 x 360
B+C 462 x 300 x 350
462 x 300 x 360
560 x 300 x 350
560 x 300 x 360
D 462 x 500 x 350
462 x 500 x 360
560 x 500 x 350
560 x 500 x 360
Position Niche size
W D H
The microwave can be fitted in position A, B, C or D:
4 mm
Measurements in (mm)