Oxygenics PowerSelect Combo - Manual

STOP!
Need HelP?
PleaSe dO NOT reTurN THiS
PrOducT TO THe STOre.
If you need installation assistance, replacement
parts or have questions regarding our warranty
please contact customer service at
1.866.440.9257
or
1.775.420.5600
Support is also available via email at
[email protected]
Be sure to visit our website at
www.oxygenics.com
Business Hours: Monday-Friday
7:00 am to 4:30pm PST
STeP 1
Remove your
existing shower
head. To remove,
turn the existing
shower head in a
counterclockwise
direction.
STeP 2
Remove any
remnants of old
plumber’s tape
and flush out
shower pipe for
5 to 10 seconds.
STeP 3
Wrap plumber’s
tape clockwise
3 or 4 turns
around threaded
end of shower
arm.
STeP 4
Screw the diverter
clockwise onto
the taped portion
of the shower
arm. Wrap
plumber’s tape
3 turns around
threaded ends of
the diverter.
STeP 5
In a clockwise
direction, screw
fixed unit onto
the taped portion
of the diverter
and hand
tighten.
STeP 6
Attach grooved end
of hose to diverter
and hand tighten.
Attach smooth end
of hose to handheld
shower and tighten.
Place handheld unit
into holder on right
side of the diverter.
eaSY TWiST SPraY
SelecTiON
Enjoying multiple spray
patterns during your
shower has never
been easier. With the
PowerSelect’s easy
twist design, simply
rotate the easy spray
selector for a quick spray
change.
uSiNG THe diVerTer
To change the shower spray: Place your
index finger on one lever and your thumb on
the other lever and rotate either clockwise or
counter clockwise (depending on the current
position) until you feel it click into place.
aTTeNTiON:
SmOOTH eNd Of HOSe aTTacHeS
TO SHOWer Head
eaSY iNSTallaTiON
iNSTrucTiONS
P
ower
S
elect