For continuous drainage, Please note – NewAir Portable Air Conditioner AC-10000E User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
For Continuous Drainage
Remove the water plug from the
drainage port ancTretain It for future
use.
Connect the included drainage hose
to the drainage port as shown.
Connect the other end of the hose
into a drain.
FIG.1S
Water plug
^ Cap for the
water plug
The drainage hose may be extended
by adding an extension hose with a
suitable connector.
PLEASE NOTE:
1. The drain must be at or below the level
Of
the drainage port.
2. The
full
water tank indicator light will not
work when the unit is being
continuously
drained.
3. To extend the drainage hose, you can
connect it with another hose with an
overall diameter of approximately 0.7”
(18 mm).
4. If the room humidity
level
is
over
85%, it
will be necessary to continuously drain
the unit using the drainage hose.
FIG.19
wW
Drainage hose
— included with the unit
FIG.20
Drainage hose
included with the unit
Extension hose (OD; 0.7”)
12