Ditch Witch JT30AT - Manual (Page 227)

Service - 227
JT30 /JT30 All Terrain Operator’s Manual
As Needed
CMW
Check Pipeloader Inserts
Check pipeloader inserts at indicated areas for
wear. Flip gripper inserts for longer wear, or
replace as needed. See your Ditch Witch dealer for
replacement parts.
1. Wear pad
2. Shuttle wear pad
3. Shuttle gripper pad
4. Catch arm wear pad
Check Front Pipe Guide Inserts
Check front pipe guide inserts (2) for wear. Rotate
inserts for longer wear, or replace as needed. See
your Ditch Witch dealer for replacement parts.
To replace:
1. Remove lynch pins (1, one on each side).
2. Remove guide inserts (2).
3. Remove pin (1) and open pipe guide.
4. Remove guide inserts (2).
5. Replace in reverse order.
Check Fluid Pump Ball Valve
Check ball valve for leaks. Tighten stem packing as
needed. See your Ditch Witch dealer for
replacement packing.
IMPORTANT: Ensure bolts are tightened evenly
to enable inserts to slide freely and wear evenly.