Aqua Lung Apeks Regulator - Manual (Page 12)

US
12
CAUTION! Ensure
location grooves are free
from dirt and debris.
3. Refitting the exhaust
diffusers is carried out
by sliding ONE diffuser
at a time onto the case,
once both diffusers
are located on the
case, squeeze the two
diffusers together until
you hear an audible
“click”.
Note: The removal
and refitting of the small exhaust diffusers is carried out in
exactly the same way as the large exhaust diffusers. If the
exhaust diffusers do not securely clip together then they may
become detached and lost. (If required, exhaust diffusers may be
purchased separately).
WARNING: Do not attempt to use tools to remove or attach the
exhaust diffusers. After the removal of the exhaust diffusers, care
must be taken to prevent damage to the exhaust valve. Do not attempt
to poke, pull or touch the exhaust valve or surrounding area with
any tools. If damage to this part or surrounding area occurs then this
could cause your regulator to leak, causing serious malfunction or
even personal injury. Care must be taken when securing alternative
sets of diffusers, do not apply excessive force as damage may occur
to the diffusers, exhaust valve or surrounding area.
Shaded area indicates exhaust
valve and surrounding area.
Regulator Owner’s Manual
............................................................................................
LOCATE
SLIDE
Showing
Compact
Exhaust Option
Shaded area
indicates
exhaust
valve and
surrounding
area.