Set up rapid rekeying on the clients, Set up rapid rekeying on the clients -38 – Enterasys Networks 802.11 User Manual
Page 118
Configuring for Rapid Rekeying
5-38
Set Up Rapid Rekeying on the Clients
This section describes how to set up Rapid Rekeying on a Windows XP client. For more
information, refer to the Release Notes or the Readme file that came with the RoamAbout
PC Card driver.
1.
Open the Control Panel by selecting Start
→
Programs
→
Control Panel.
2.
In the Control Panel, open Network Connections then open the Wireless Network
Connection (RoamAbout 802.11 DS).
3.
In the Wireless Network Connection Status window, click on the Properties button.
4.
In the Wireless Connection Properties window, click on the Wireless Networks tab.
5.
If the Wireless Network Name you want to configure is in the Preferred Networks
field of the Wireless tab (shown below), click on the name then click the Properties
button. Otherwise, click on the Wireless Network Name in the Available Networks
field, then click on the Configure button.