Dell PowerVault MD3220 Instruction Manuals and User Guides
We have 18 Instruction Manuals and User Guides for PowerVault MD3220 Dell
Manuals
Read manual
Read manual
| Recognized languages: | English Čeština Français Deutsch Polszczyzna Русский Español |
|---|---|
| Pages: | 32 |
| Size: | 855 KB |
Show table of contents
Read manual
Document Outline
- Airborne Contaminant Level Update
- 气载污染物级别更新
- 空氣中懸浮污染物級別更新
- Aktualizace úrovně uvolňování znečišt’ujících látek do vzduchu
- Mise à jour des contaminants en suspension dans l'air
- Aktualisierung zur Luftverschmutzungsklasse
- Ενηµέρωση επιπέδων αεροµεταφερόµενων ρύπων
- Pembaruan Tingkat Pencemaran Udara
- 空気汚染物質レベルのアップデート情報
- 공기 중 오염 물질 수준 업데이트
- Aktualizacja danych o poziomie zanieczyszczeń w powietrzu
- Atualização do nível de poluentes transportados pelo ar
- Обновление информации об уровне загрязняющих веществ в атмосфере
- Actualización del nivel de contaminación atmosférica
- Havadan Geçen Madde Düzeyi Güncelleme
- ןוכדע יבגל תמר םוהיז ריו
| Recognized languages: | English Español Français |
|---|---|
| Pages: | 76 |
| Size: | 2.94 MB |
Show table of contents
Read manual
Document Outline
- Dell PowerVault MD3200 and MD3220 Storage Arrays
- Getting Started With Your System
- Introducción al sistema
- Getting Started With Your System
- Notes, Cautions, and Warnings
- Before You Begin
- Other Documentation and Media You May Need
- Supported Operating Systems
- Common Configurations
- Installation and Configuration
- Unpacking the System
- Installing the Rails and System in a Rack
- Connecting the Power Cable(s)
- Securing the Power Cable(s)
- Cabling Your Expansion Enclosure
- Turning On the Enclosure
- Installing the Bezel
- Installing the MD Storage Software
- 1 Insert the MD series resource media.
- 2 Select Install MD Storage Software.
- 3 Read and accept the license agreement.
- 4 Select one of the following installation options from the Install Set drop-down menu:
- 5 Select the MD storage array model(s) you are setting up to serve as data storage for this host server.
- 6 Choose whether to start the event monitor service automatically when the host server reboots or manually
- 7 Confirm the installation location and click Install.
- 8 If prompted, reboot the host server once the installation completes.
- 9 Start the MD Storage Manager and discover the array(s).
- 10 If applicable, activate any premium features purchased with your storage array. If you purchased premium features, see the printed activation card shipped with your storage array.
- Locating Your Service Tag
- NOM Information (Mexico Only)
- Technical Specifications
- Remarques, précautions et avertissements
- Avant de commencer
- Autre documentation et support dont vous pourriez avoir besoin
- Systèmes d'exploitation pris en charge
- Configurations courantes
- Installation et configuration
- Déballage du système
- Installation des rails et du système dans un rack
- Branchement du ou des câbles d'alimentation
- Fixation du ou des câbles d'alimentation
- Câblage de votre boîtier d'extension
- Mise sous tension du boîtier
- Installation du cadre
- Installation du logiciel MD Storage
- 1 Insérez le support Ressource série MD.
- 2 Sélectionnez Install MD Storage Software (Installer le logiciel de stockage MD).
- 3 Lisez le contrat de licence et acceptez-le.
- 4 Sélectionnez l'une des options d'installation suivantes dans le menu déroulant Install Set (Configuration d'installation) :
- 5 Sélectionnez le(s) modèle(s) de matrice de stockage MD que vous souhaitez définir comme stockage de données pour ce serveur hôte.
- 6 Choisissez de démarrer le service de moniteur des événements automatiquement lors du redémarrage du serveur hôte ou manuellement.
- 7 Confirmez l'emplacement de l'installation et cliquez sur Install (Installer).
- 8 En réponse à l'invitation (le cas échéant), redémarrez le serveur hôte une fois l'installation terminée.
- 9 Démarrez MD Storage Manager et lancez la détection des matrices.
- 10 Le cas échéant, activez les fonctions premium achetées avec votre matrice de stockage. Si vous avez acheté des fonctions premium, consultez la carte d'activation livrée avec votre matrice de stockage.
- Identification du numéro de service
- Informations NOM (Mexique uniquement)
- Caractéristiques techniques
- Notas, Avisos e Advertências
- Antes de começar
- Outros documentos e mídias dos quais você pode precisar
- Sistemas operacionais suportados
- Configurações comuns
- Instalação e configuração
- Remover o sistema da embalagem
- Instalar os trilhos e o sistema no rack
- Conectar o(s) cabo(s) de alimentação
- Prender o(s) cabo(s) de alimentação
- Cabeamento do gabinete de expansão
- Ligar o gabinete
- Instalar o bezel
- Instalar o software de armazenamento MD
- 1 Insira a mídia de recursos da série MD.
- 2 Selecione Install MD Storage Software.
- 3 Leia e aceite o contrato de licença.
- 4 Selecione uma das seguintes opções de instalação no menu suspenso Install Set (Conjunto de instalação):
- 5 Selecione o(s) modelo(s) de matriz de armazenamento MD que você está configurando como armazenamento de dados para este servidor host.
- 6 Indique se você quer começar a monitoração de eventos automaticamente quando o servidor é reinicializado ou manualmente.
- 7 Confirme o local de instalação e clique em Install.
- 8 Se for solicitado, reinicialize o servidor quando a instalação terminar.
- 9 Abra o aplicativo MD Storage Manager (Gerenciador de armazenamento MD) e faça a descoberta da(s) matriz(es).
- 10 Se for o caso, ative todos os recursos Premium comprados com a sua matriz de armazenamento. Se for o caso, consulte o cartão impresso de ativação que é fornecido com a sua matriz de armazenamento.
- Localizar a etiqueta de serviço
- Informações da norma NOM (apenas para o México)
- Especificações técnicas
- Notas, precauciones y avisos
- Antes de comenzar
- Documentación y soportes adicionales útiles
- Sistemas operativos admitidos
- Configuraciones comunes
- Instalación y configuración
- Desembalaje del sistema
- Instalación de los rieles y del sistema en un bastidor
- Conexión de los cables de alimentación
- Fijación de los cables de alimentación
- Cableado del gabinete de expansión
- Encendido del gabinete
- Instalación del bisel
- Instalación del software MD Storage
- 1 Inserte el soporte de recursos de la serie MD.
- 2 Seleccione Install MD Storage Software (Instalar el software MD Storage).
- 3 Lea y acepte el contrato de licencia.
- 4 Seleccione una de las siguientes opciones de instalación del menú desplegable Install Set (Conjunto de instalación):
- 5 Seleccione los modelos de matrices de almacenamientos MD que está configurando para que sirvan como almacenamiento de datos para este servidor host.
- 6 Elija si desea iniciar el servicio de monitor de eventos automática o manualmente al reiniciar el servidor host
- 7 Confirme la ubicación de la instalación y haga clic en Install (Instalar).
- 8 Si se le solicita, reinicie el servidor host tras completar la instalación.
- 9 Inicie MD Storage Manager y detecte las matrices.
- 10 Si se aplica, active cualquiera de las funciones premium adquiridas con la matriz de almacenamiento. Si ha adquirido una función premium, consulte la tarjeta de activación impresa enviada con la matriz de almacenamiento.
- Localización de la etiqueta de servicio
- Información de la NOM (sólo para México)
- Especificaciones técnicas
| Recognized languages: | English Español Français Deutsch |
|---|---|
| Pages: | 2 |
| Size: | 1.85 MB |
| Recognized languages: | English Čeština Français Deutsch Polszczyzna Русский Español |
|---|---|
| Pages: | 32 |
| Size: | 855 KB |
Show table of contents
Read manual
Document Outline
- Airborne Contaminant Level Update
- 气载污染物级别更新
- 空氣中懸浮污染物級別更新
- Aktualizace úrovně uvolňování znečišt’ujících látek do vzduchu
- Mise à jour des contaminants en suspension dans l'air
- Aktualisierung zur Luftverschmutzungsklasse
- Ενηµέρωση επιπέδων αεροµεταφερόµενων ρύπων
- Pembaruan Tingkat Pencemaran Udara
- 空気汚染物質レベルのアップデート情報
- 공기 중 오염 물질 수준 업데이트
- Aktualizacja danych o poziomie zanieczyszczeń w powietrzu
- Atualização do nível de poluentes transportados pelo ar
- Обновление информации об уровне загрязняющих веществ в атмосфере
- Actualización del nivel de contaminación atmosférica
- Havadan Geçen Madde Düzeyi Güncelleme
- ןוכדע יבגל תמר םוהיז ריו
| Recognized languages: | English Čeština Français Deutsch Polszczyzna Русский Español |
|---|---|
| Pages: | 32 |
| Size: | 856 KB |
Show table of contents
Read manual
Document Outline
- Airborne Contaminant Level Update
- 气载污染物级别更新
- 空氣中懸浮污染物級別更新
- Aktualizace úrovně uvolňování znečišt’ujících látek do vzduchu
- Mise à jour des contaminants en suspension dans l'air
- Aktualisierung zur Luftverschmutzungsklasse
- Ενηµέρωση επιπέδων αεροµεταφερόµενων ρύπων
- Pembaruan Tingkat Pencemaran Udara
- 空気汚染物質レベルのアップデート情報
- 공기 중 오염 물질 수준 업데이트
- Aktualizacja danych o poziomie zanieczyszczeń w powietrzu
- Atualização do nível de poluentes transportados pelo ar
- Обновление информации об уровне загрязняющих веществ в атмосфере
- Actualización del nivel de contaminación atmosférica
- Havadan Geçen Madde Düzeyi Güncelleme
- ןוכדע יבגל תמר םוהיז ריו
| Recognized languages: | English Čeština Français Deutsch Polszczyzna Русский Español |
|---|---|
| Pages: | 32 |
| Size: | 855 KB |
Show table of contents
Read manual
Document Outline
- Airborne Contaminant Level Update
- 气载污染物级别更新
- 空氣中懸浮污染物級別更新
- Aktualizace úrovně uvolňování znečišt’ujících látek do vzduchu
- Mise à jour des contaminants en suspension dans l'air
- Aktualisierung zur Luftverschmutzungsklasse
- Ενηµέρωση επιπέδων αεροµεταφερόµενων ρύπων
- Pembaruan Tingkat Pencemaran Udara
- 空気汚染物質レベルのアップデート情報
- 공기 중 오염 물질 수준 업데이트
- Aktualizacja danych o poziomie zanieczyszczeń w powietrzu
- Atualização do nível de poluentes transportados pelo ar
- Обновление информации об уровне загрязняющих веществ в атмосфере
- Actualización del nivel de contaminación atmosférica
- Havadan Geçen Madde Düzeyi Güncelleme
- ןוכדע יבגל תמר םוהיז ריו
| Recognized languages: | English Русский Deutsch Español Français Čeština Polszczyzna |
|---|---|
| Pages: | 174 |
| Size: | 8.42 MB |
Show table of contents
Read manual
Document Outline
- Getting Started With Your System
- Začínáme se systémem
- Guide de mise en route
- Handbuch zum Einstieg mit dem System
- Τα πρώτα βήματα με το σύστημά σας
- Rozpoczęcie pracy z systemem
- Начало работы с системой
- Introducción al sistema
- Sisteminizi Kullanmaya Başlarken
| Recognized languages: | English |
|---|---|
| Pages: | 11 |
| Size: | 302 KB |
Show table of contents
Read manual
| Recognized languages: | English Čeština Français Deutsch Polszczyzna Русский Español |
|---|---|
| Pages: | 32 |
| Size: | 855 KB |
Show table of contents
Read manual
Document Outline
- Airborne Contaminant Level Update
- 气载污染物级别更新
- 空氣中懸浮污染物級別更新
- Aktualizace úrovně uvolňování znečišt’ujících látek do vzduchu
- Mise à jour des contaminants en suspension dans l'air
- Aktualisierung zur Luftverschmutzungsklasse
- Ενηµέρωση επιπέδων αεροµεταφερόµενων ρύπων
- Pembaruan Tingkat Pencemaran Udara
- 空気汚染物質レベルのアップデート情報
- 공기 중 오염 물질 수준 업데이트
- Aktualizacja danych o poziomie zanieczyszczeń w powietrzu
- Atualização do nível de poluentes transportados pelo ar
- Обновление информации об уровне загрязняющих веществ в атмосфере
- Actualización del nivel de contaminación atmosférica
- Havadan Geçen Madde Düzeyi Güncelleme
- ןוכדע יבגל תמר םוהיז ריו
| Recognized languages: | English |
|---|---|
| Pages: | 28 |
| Size: | 892 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 237 |
| Size: | 4.90 MB |
Show table of contents
Read manual
Document Outline
- Dell PowerVault MD Series Storage Arrays Administrator's Guide
- Introduction
- About Your MD Series Storage Array
- Physical Disks, Virtual Disks, And Disk Groups
- Disk Pools
- Thin Virtual Disks
- RAID Levels
- Segment Size
- Virtual Disk Operations
- Disk Group Operations
- RAID Background Operations Priority
- Virtual Disk Migration And Disk Roaming
- Advanced Features
- Multi-Path Software
- Load Balancing
- Monitoring System Performance
- Discovering And Managing Your Storage Array
- Out-Of-Band Management
- In-Band Management
- Storage Arrays
- Setting Up Your Storage Array
- Locating Storage Arrays
- Naming Or Renaming Storage Arrays
- Setting A Password
- Adding Or Editing A Comment To An Existing Storage Array
- Removing Storage Arrays
- Enabling Premium Features
- Displaying Failover Alert
- Changing The Cache Settings On The Storage Array
- Changing Expansion Enclosure ID Numbers
- Changing The Enclosure Order
- Configuring Alert Notifications
- Battery Settings
- Setting The Storage Array RAID Controller Module Clocks
- Using iSCSI
- Changing The iSCSI Target Authentication
- Entering Mutual Authentication Permissions
- Creating CHAP Secrets
- Changing The iSCSI Target Identification
- Changing The iSCSI Target Discovery Settings
- Configuring The iSCSI Host Ports
- Advanced iSCSI Host Port Settings
- Viewing Or Ending An iSCSI Session
- Viewing iSCSI Statistics And Setting Baseline Statistics
- Edit, Remove, Or Rename Host Topology
- Event Monitor
- About Your Host
- Disk Groups, Standard Virtual Disks, And Thin Virtual Disks
- Creating Disk Groups And Virtual Disks
- Thin Virtual Disks
- Advantages Of Thin Virtual Disks
- Physical Vs Virtual Capacity On A Thin Virtual Disk
- Thin Virtual Disk Requirements And Limitations
- Thin Volume Attributes
- Thin Virtual Disk States
- Comparison—Types Of Virtual Disks And Copy Services
- Rollback On Thin Virtual Disks
- Initializing A Thin Virtual Disk
- Changing A Thin Virtual Disk To A Standard Virtual Disk
- Choosing An Appropriate Physical Disk Type
- Physical Disk Security With Self Encrypting Disk
- Configuring Hot Spare Physical Disks
- Enclosure Loss Protection
- Drawer Loss Protection
- Host-To-Virtual Disk Mapping
- Creating Host-To-Virtual Disk Mappings
- Modifying And Removing Host-To-Virtual Disk Mapping
- Changing Controller Ownership Of The Virtual Disk
- Removing Host-To-Virtual Disk Mapping
- Changing The RAID Controller Module Ownership Of A Disk Group
- Changing The RAID Level Of A Disk Group
- Removing A Host-To-Virtual Disk Mapping Using Linux DMMP
- Restricted Mappings
- Storage Partitioning
- Disk Group And Virtual Disk Expansion
- Disk Group Migration
- Storage Array Media Scan
- Disk Pools And Disk Pool Virtual Disks
- Difference Between Disk Groups And Disk Pools
- Disk Pool Restrictions
- Creating A Disk Pool Manually
- Automatically Managing The Unconfigured Capacity In Disk Pools
- Locating Physical Disks In A Disk Pool
- Renaming A Disk Pool
- Configuring Alert Notifications For A Disk Pool
- Adding Unassigned Physical Disks To A Disk Pool
- Configuring The Preservation Capacity Of A Disk Pool
- Changing The Modification Priority Of A Disk Pool
- Changing The RAID Controller Module Ownership Of A Disk Pool
- Checking Data Consistency
- Deleting A Disk Pool
- Viewing Storage Array Logical Components And Associated Physical Components
- Secure Disk Pools
- Changing Capacity On Existing Thin Virtual Disks
- Creating A Thin Virtual Disk From A Disk Pool
- Using SSD Cache
- How SSD Cache Works
- Benefits Of SSD Cache
- Choosing SSD Cache Parameters
- SSD Cache Restrictions
- Creating An SSD Cache
- Viewing Physical Components Associated With An SSD Cache
- Locating Physical Disks In An SSD Cache
- Adding Physical Disks To An SSD Cache
- Removing Physical Disks From An SSD Cache
- Suspending Or Resuming SSD Caching
- Changing I/O Type In An SSD Cache
- Renaming An SSD Cache
- Deleting An SSD Cache
- Using The Performance Modeling Tool
- Premium Feature—Snapshot Virtual Disk
- Snapshot Virtual Disk Vs. Snapshot Virtual Disk (Legacy)
- Snapshot Images And Groups
- Snapshot Virtual Disk Read/Write Properties
- Snapshot Groups And Consistency Groups
- Understanding Snapshot Repositories
- Creating Snapshot Images
- Scheduling Snapshot Images
- Performing Snapshot Rollbacks
- Creating A Snapshot Group
- Converting Snapshots (Legacy) To A Snapshot Group
- Converting A Snapshot Virtual Disk To Read-Write
- Viewing Associated Physical Components Of An Individual Repository Virtual Disk
- Creating A Consistency Group
- Creating A Snapshot Virtual Disk Of A Snapshot Image
- Snapshot Virtual Disk Limitations
- Creating A Snapshot Virtual Disk
- Creating A Snapshot Virtual Disk Repository
- Changing The Settings Of A Snapshot Virtual Disk
- Disabling A Snapshot Virtual Disk Or Consistency Group Snapshot Virtual Disk
- Re-creating A Snapshot Virtual Disk Or Consistency Group Snapshot Virtual Disk
- Renaming A Snapshot Virtual Disk Or Consistency Group Snapshot Virtual Disk
- Deleting A Snapshot Virtual Disk Or Consistency Group Snapshot Virtual Disk
- Creating A Consistency Group Snapshot Virtual Disk
- Creating A Consistency Group Snapshot Virtual Disk Repository (Manually)
- Disabling A Snapshot Virtual Disk Or Consistency Group Snapshot Virtual Disk
- Re-creating A Snapshot Virtual Disk Or Consistency Group Snapshot Virtual Disk
- Changing The Modification Priority Of An Overall Repository Virtual Disk
- Changing The Media Scan Setting Of An Overall Repository Virtual Disk
- Changing The Pre-read Consistency Check Setting Of An Overall Repository Virtual Disk
- Increasing The Capacity Of An Overall Repository
- Decreasing The Capacity Of The Overall Repository
- Performing A Revive Operation
- Premium Feature—Snapshot Virtual Disks (Legacy)
- Scheduling A Snapshot Virtual Disk
- Creating A Snapshot Virtual Disk Using The Simple Path
- Creating A Snapshot Virtual Disk Using The Advanced Path
- Specifying Snapshot Virtual Disk Names
- Snapshot Repository Capacity
- Re-Creating Snapshot Virtual Disks
- Disabling A Snapshot Virtual Disk
- Re-Creating A Snapshot Virtual Disk
- Premium Feature—Virtual Disk Copy
- Using Virtual Disk Copy With Snapshot Or Snapshot (Legacy) Premium Feature
- Types Of Virtual Disk Copies
- Creating A Virtual Disk Copy For An MSCS Shared Disk
- Virtual Disk Read/Write Permissions
- Virtual Disk Copy Restrictions
- Creating A Virtual Disk Copy
- Preferred RAID Controller Module Ownership
- Failed RAID Controller Module
- Copy Manager
- Copying The Virtual Disk
- Storage Array Performance During Virtual Disk Copy
- Setting Copy Priority
- Stopping A Virtual Disk Copy
- Recopying A Virtual Disk
- Removing Copy Pairs
- Device Mapper Multipath For Linux
- Configuring Asymmetric Logical Unit Access
- ALUA Performance Considerations
- Automatic Transfer Of Ownership
- Native ALUA Support On Microsoft Windows And Linux
- Enabling ALUA On VMware ESX/ESXi
- Verifying ALUA On VMware ESX/ESXi
- Verifying If Host Server Is Using ALUA For MD Storage Array
- Setting Round-Robin Load Balancing Policy On ESX/ESXi-Based Storage Arrays
- Premium Feature—Remote Replication
- About Asynchronous Remote Replication
- Remote Replicated Pairs And Replication Repositories
- Types Of Remote Replication
- Remote Replication Requirements And Restrictions
- Setting Up Remote Replication
- Activating Remote Replication Premium Features
- Deactivating Remote Replication
- Remote Replication Groups
- Replicated Pairs
- Premium Feature—Remote Replication (Legacy)
- Overview
- Switchable Host Access Configuration Required With Remote Replication (Legacy)
- Activating Remote Replication (Legacy)
- Replication Repository Virtual Disks
- RAID Levels For Replication Repository Virtual Disks
- Primary And Secondary Virtual Disk Pairs
- Using Remote Replication (Legacy) With Other Features
- Storage Partitioning With Remote Replication (Legacy)
- Snapshot Virtual Disk With Remote Replication (Legacy)
- Virtual Disk Copy With Remote Replication (Legacy)
- Virtual Disk Expansion With Remote Replication (Legacy)
- Required Switch Zoning Configurations
- Zoning Guidelines for Remote Replication (Legacy)
- Switch Cascading
- Journaling File Systems And Remote Replication (Legacy)
- Prerequisites For Setting Up And Managing Remote Replication (Legacy)
- Activating The Remote Replication (Legacy) Premium Feature And Creating Replication Virtual Disks
- Activating And Creating Replication Repository Virtual Disks From The Storage Array
- Activating And Creating Replication Repository Virtual Disks From An Existing Disk Group
- Creating A Remote Replication (Legacy)
- Selecting The Secondary Virtual Disk
- Setting The Write Mode
- Setting Synchronization Priority And Synchronization Method
- Completing The Remote Replication (Legacy)
- RAID Controller Module Ownership/Preferred Path
- Viewing Information About A Remote Replication (Legacy) Or Replication Repository (Legacy) Virtual Disk
- Viewing The Storage Array Profile
- Viewing The Properties Pane
- Viewing Logical Elements Of The Secondary Virtual Disk
- Viewing The Physical Components Or Logical Elements Of The Primary Virtual Disk
- Virtual Disk Status Icons
- Changing Write Mode And Consistency Group Membership
- Resynchronizing Virtual Disks
- Normally Synchronized Virtual Disks
- Changing Synchronization Priority And Method
- Unsynchronized Virtual Disks
- Automatically Resynchronizing Virtual Disks
- Manually Resynchronizing Virtual Disks
- Reversing Roles Between The Primary And Secondary Virtual Disks
- Promoting The Secondary Virtual Disk Or Demoting The Primary Virtual Disk
- Suspending A Remote Replication (Legacy)
- Resuming A Remote Replication (Legacy)
- About Resumed Remote Replications
- Testing Communication Between The Primary And Secondary Virtual Disks
- Deleting A Virtual Disk From A Replicated Pair In A Storage Array
- Management Firmware Downloads
- Downloading RAID Controller And NVSRAM Packages
- Downloading Both RAID Controller And NVSRAM Firmware
- Downloading Only NVSRAM Firmware
- Downloading Physical Disk Firmware
- Downloading MD3060e Series Expansion Module EMM Firmware
- Self-Monitoring Analysis And Reporting Technology (SMART)
- Media Errors And Unreadable Sectors
- Firmware Inventory
- System Interfaces
- Storage Array Software
- Start-Up Routine
- Device Health Conditions
- Trace Buffers
- Collecting Physical Disk Data
- Event Log
- Recovery Guru
- Storage Array Profile
- Viewing The Physical Associations
- Recovering From An Unresponsive Storage Array Condition
- Locating A Physical Disk
- Locating An Expansion Enclosure
- Capturing The State Information
- SMrepassist Utility
- Unidentified Devices
- Recovering From An Unidentified Storage Array
- Starting Or Restarting The Host Context Agent Software
- Getting Help
| Recognized languages: | English |
|---|---|
| Pages: | 388 |
| Size: | 5.39 MB |
Show table of contents
Read manual
Document Outline
- Dell PowerVault Modular Disk Storage Arrays CLI Guide
- About The Command Line Interface
- About The Script Commands
- Configuring A Storage Array
- Using The Snapshot Feature
- Before Using Snapshot CLI Commands
- Snapshot Images And Groups
- Snapshot Groups And Snapshot Consistency Groups
- Understanding Snapshot Repositories
- Consistency Groups And Remote Replication
- Creating Snapshot Images
- Creating A Snapshot Image
- Deleting A Snapshot Image
- Creating A Consistency Group Snapshot Virtual Disk
- Creating A Consistency Group Snapshot Image
- Deleting A Snapshot Virtual Disk Or A Consistency Group Snapshot Virtual Disk
- Deleting A Consistency Group Snapshot Image
- Scheduling Snapshot Images
- Starting, Stopping And Resuming A Snapshot Rollback
- Creating A Snapshot Group
- Deleting A Snapshot Group
- Reviving A Snapshot Group
- Creating A Consistency Group
- Deleting A Consistency Group
- Setting Consistency Group Attributes
- Adding A Member Virtual Disk To A Consistency Group
- Removing A Member Virtual Disk From A Consistency Group
- Changing The Pre-read Consistency Check Setting Of An Overall Repository Virtual Disk
- Setting Snapshot Virtual Disk Repository Virtual Disk Capacity
- Setting Snapshot Group Repository Virtual Disk Capacity
- Reviving Disk Groups, Physical Disks, Snapshot Groups, And Snapshot Virtual Disks
- Using The Snapshot (Legacy) Feature
- Using Host Servers To Create An Initial Snapshot Virtual Disk
- Creating A Snapshot Virtual Disk
- Enabling The Snapshot Virtual Disk Feature
- Creating A Snapshot Virtual Disk With User-Assigned Physical Disks
- Preparing Host Servers To Create An Initial Snapshot Virtual Disk
- Creating The Initial Snapshot Virtual Disk
- Creating A Snapshot Virtual Disk With Software-Assigned Physical Disks
- Creating A Snapshot Virtual Disk By Specifying A Number Of Physical Disks
- User-Defined Parameters
- Names Of Snapshot Virtual Disks And Repository Virtual Disks
- Changing Snapshot Virtual Disk Settings
- Stopping And Deleting A Snapshot Virtual Disk
- Using The Virtual Disk Copy Feature
- About Virtual Disk Copy
- Virtual Disk Copy Types
- Creating A Virtual Disk Copy
- Viewing Virtual Disk Copy Properties
- Changing Virtual Disk Copy Settings
- Recopying A Virtual Disk
- Stopping A Virtual Disk Copy
- Removing Copy Pairs
- Interaction With Other Features
- About Snapshot (Legacy) Premium Features With Virtual Disk Copy
- Using The Remote Replication Premium Feature
- How Remote Replication Works
- Replication Pairs And Replication Repositories
- Differences Between Remote Replication And Remote Replication (Legacy) Features
- Link Interruptions Or Secondary Virtual Disk Errors
- Resynchronization
- Remote Replication Group
- Previous Users Of Remote Replication (Legacy) Premium Feature
- Remote Replication Requirements And Restrictions
- Primary And Secondary Virtual Disks
- Setting Up Remote Replication
- Enabling The Remote Replication Premium Feature
- Activating The Remote Replication Premium Feature
- Creating A Remote Replication Group
- Adding Primary Virtual Disk To Remote Replication Group
- Changing Remote Replication Group Settings
- Adding Secondary Virtual Disk To Remote Replication Group
- Suspending A Remote Replication Group
- Deleting A Remote Replication Group
- Removing A Virtual Disk Or Repository Virtual Disk From A Remote Replication Group
- Disabling The Remote Replication Premium Feature
- Deactivating The Remote Replication Premium Feature
- Interaction With Other Premium Features
- Standard Remote Replication Commands
- Using The Remote Replication (Legacy) Premium Feature
- How Remote Replication (Legacy) Works
- Creating A Remote Replicated Pair
- Changing Remote Replication (Legacy) Settings
- Suspending And Resuming A Replication Relationship
- Removing A Replication Relationship
- Deleting A Primary Virtual Disk Or A Secondary Virtual Disk
- Disabling The Remote Replication (Legacy) Premium Feature
- Deactivating The Remote Replication (Legacy) Premium Feature
- Interaction With Other Premium Features
- Maintaining A Storage Array
- Script Commands
- Command Formatting Rules
- Firmware Compatibility Levels
- Commands Listed By Function
- Disk Group Commands
- Enclosure Commands
- Host Topology Commands
- iSCSI Commands
- Physical Disk Commands
- RAID Controller Module Commands
- Remote Replication Commands
- Session Command
- Show String Command
- Snapshot Commands
- SSD Cache Commands
- Storage Array Commands
- Virtual Disk Commands
- Virtual Disk Copy Commands
- Commands Listed Alphabetically
- Activate Remote Replication Feature
- Activate Storage Array Firmware
- Add Member To Consistency Group
- Add Physical Disks To SSD Cache
- Add Virtual Disk To Remote Replication Group
- Autoconfigure Storage Array
- Autoconfigure Storage Array Hot Spares
- Blink SSD Cache
- Cancel Remote Replication Group Role Reversal
- Change SSD Cache Application Type
- Check Remote Replication Status
- Check Remote Replication Group Consistency
- Check Repository Consistency
- Check Storage Array Connectivity
- Check Virtual Disk Consistency
- Clear Physical Disk Port Statistics
- Clear Remote Replication Fault
- Clear Storage Array Configuration
- Clear Storage Array Core Dump
- Clear Storage Array Event Log
- Clear Storage Array Firmware Pending Area
- Clear Storage Array Recovery Mode
- Clear Virtual Disk Reservations
- Clear Virtual Disk Unreadable Sectors
- Configure Automatic Support Bundle Collection
- Convert Snapshot (Legacy) Virtual Disk To Snapshot Group
- Create Consistency Group
- Create Consistency Group Snapshot Image
- Create Consistency Group Snapshot Virtual Disk
- Create Consistency Group Snapshot Virtual Disk Mapping
- Create Disk Group
- Create Disk Pool
- Create Host
- Create Host Group
- Create Host Port
- Create iSCSI Initiator
- Create RAID Virtual Disk (Automatic Physical Disk Select)
- Create RAID Virtual Disk (Free Capacity Base Select)
- Create RAID Virtual Disk (Manual Physical Disk Select)
- Create RAID Virtual Disk On A Disk Pool
- Create Read-Only Snapshot Virtual Disk
- Create Remote Replication
- Create Remote Replication Group
- Create Snapshot Group
- Create Snapshot Image
- Create Snapshot (Legacy) Virtual Disk
- Create Snapshot Virtual Disk
- Create SSD Cache
- Create Storage Array Security Key
- Create Virtual Disk Copy
- Deactivate Remote Replication (Legacy)
- Delete Consistency Group
- Delete Consistency Group Snapshot Image
- Delete Consistency Group Snapshot Virtual Disk
- Delete Disk Group
- Delete Disk Pool
- Delete Host
- Delete Host Group
- Delete Host Port
- Delete iSCSI Initiator
- Delete Snapshot Group
- Delete Snapshot Image
- Delete Snapshot (Legacy) Virtual Disk
- Delete Snapshot Virtual Disk
- Delete Snapshot Virtual Disk or Delete Snapshot Virtual Disk Schedule
- Delete SSD Cache
- Delete Virtual Disk
- Delete Virtual Disk On A Disk Pool
- Diagnose RAID Controller Module
- Diagnose RAID Controller Module iSCSI Host Cable
- Diagnose Remote Replication
- Disable Storage Array Feature
- Display Automatic Support Bundle Collection Configuration
- Display Support Bundle Collection Schedule
- Download Enclosure Management Module Firmware
- Download Physical Disk Firmware
- Download Storage Array Firmware/NVSRAM
- Download Storage Array Physical Disk Firmware
- Download Storage Array NVSRAM
- Enable Disk Group Security
- Enable Disk Pool Security
- Enable Or Disable SSD Cache For A Virtual Disk
- Enable RAID Controller Module Data Transfer
- Enable Storage Array Feature
- Establish Remote Replicated Pair
- Increase Virtual Disk Capacity On A Disk Pool
- Load Storage Array DBM Database
- Modify Disk Pool
- Recopy Virtual Disk Copy
- Re-Create Remote Replication Repository Virtual Disk
- Re-Create Snapshot
- Reduce Disk Pool Capacity
- Reinitialize Thin Virtual Disk
- Remove Incomplete Remote Replicated Pair From Remote Replication Group
- Remove Member Virtual Disk From Consistency Group
- Remove Physical Disks From SSD Cache
- Remove Remote Replication
- Remove Virtual Disk Copy
- Remove Virtual Disk From Remote Replication Group
- Remove Virtual Disk LUN Mapping
- Rename A Snapshot Virtual Disk
- Rename SSD Cache
- Repair Virtual Disk Consistency
- Replace Physical Disk
- Reset iSCSI IP Address
- Reset RAID Controller Module
- Reset Remote Replication Group Statistics
- Reset Storage Array Battery Install Date
- Reset Storage Array iSCSI Baseline
- Reset Storage Array SAS PHY Baseline
- Reset Storage Array Virtual Disk Distribution
- Resume Consistency Group Snapshot Virtual Disk
- Resume Remote Replication
- Resume Remote Replication Group
- Resume Snapshot Image Rollback
- Resume Snapshot (Legacy) Rollback
- Resume Snapshot Virtual Disk
- Resume SSD Cache
- Revive Disk Group
- Revive Disk Pool
- Revive Physical Disk
- Revive Snapshot Group
- Revive Snapshot Virtual Disk
- Save Enclosure Log Data
- Save Physical Disk Channel Fault Isolation Diagnostic Status
- Save Physical Disk Log
- Save RAID Controller Module NVSRAM
- Save Remote Replication Group Statistics
- Save Storage Array Configuration
- Save Storage Array Core Dump
- Save Storage Array DBM Database
- Save Storage Array DBM Validator Information File
- Save Storage Array Events
- Save Storage Array iSCSI Statistics
- Save Storage Array Performance Statistics
- Save Storage Array SAS PHY Counts
- Save Storage Array State Capture
- Save Storage Array Support Data
- Schedule Support Bundle Collection Configuration
- Scheduling Snapshots
- Set Consistency Group Attributes
- Set Consistency Group Snapshot Virtual Disk
- Set Disk Group
- Set Disk Group Forced State
- Set Disk Pool
- Set Disk Pool Complete
- Set Enclosure Attribute
- Set Enclosure Identification
- Set Foreign Physical Disk to Native
- Set Host
- Set Host Channel
- Set Host Group
- Set Host Port
- Set iSCSI Initiator
- Set iSCSI Target Properties
- Set Physical Disk Channel Status
- Set Physical Disk Hot Spare
- Set Physical Disk State
- Set RAID Controller Module
- Set Read-Only Snapshot Virtual Disk To A Read/Write Virtual Disk
- Set Remote Replication
- Set Remote Replication Group
- Set Session
- Set Snapshot Group Attributes
- Set Snapshot Group Media Scan
- Set Snapshot Group Repository Virtual Disk Capacity
- Set Snapshot Group Schedule
- Set Snapshot (Legacy) Virtual Disk
- Set Snapshot Virtual Disk Media Scan
- Set Snapshot Virtual Disk Repository Virtual Disk Capacity
- Set Storage Array
- Set Storage Array Enclosure Positions
- Set Storage Array ICMP Response
- Set Storage Array iSNS Server IPv4 Address
- Set Storage Array iSNS Server IPv6 Address
- Set Storage Array iSNS Server Listening Port
- Set Storage Array Learn Cycle
- Set Storage Array Redundancy Mode
- Set Storage Array Security Key
- Set Storage Array Time
- Set Storage Array Unnamed Discovery Session
- Set Thin Virtual Disk Attributes
- Set Virtual Disk
- Set Virtual Disk Attributes For A Disk Pool
- Set Virtual Disk Copy
- Set Virtual Disk Mapping
- Show Consistency Group Snapshot Image
- Show Current iSCSI Sessions
- Show Disk Group
- Show Disk Group Export Dependencies
- Show Disk Group Import Dependencies
- Show Disk Pool
- Show Host Ports
- Show Physical Disk
- Show Physical Disk Channel Statistics
- Show Physical Disk Download Progress
- Show RAID Controller Module
- Show RAID Controller Module NVSRAM
- Show Remote Replication Group
- Show Remote Replication Group Synchronization Progress
- Show Remote Replication Virtual Disk Candidates
- Show Remote Replication Virtual Disk Synchronization Progress
- Show Snapshot Group
- Show Snapshot Image
- Show Snapshot Virtual Disks
- Show SSD Cache
- Show SSD Cache Statistics
- Show Storage Array
- Show Storage Array Auto Configure
- Show Storage Array Core Dump
- Show Storage Array DBM Database
- Show Storage Array Host Topology
- Show Storage Array LUN Mappings
- Show Storage Array Negotiation Defaults
- Show Storage Array Unconfigured iSCSI Initiators
- Show Storage Array Unreadable Sectors
- Show String
- Show Thin Virtual Disk
- Show Virtual Disk
- Show Virtual Disk Action Progress
- Show Virtual Disk Copy
- Show Virtual Disk Copy Source Candidates
- Show Virtual Disk Copy Target Candidates
- Show Virtual Disk Performance Statistics
- Show Virtual Disk Reservations
- Start Configuration Database Diagnostic
- Start Consistency Group Snapshot Rollback
- Start Disk Group Blink
- Start Disk Group Defragment
- Start Disk Group Export
- Start Disk Group Import
- Start Disk Pool Locate
- Start Enclosure Blink
- Start iSCSI DHCP Refresh
- Start Physical Disk Blink
- Start Physical Disk Channel Blink
- Start Physical Disk Channel Fault Isolation Diagnostics
- Start Physical Disk Initialize
- Start Physical Disk Reconstruction
- Start Remote Replication Synchronization
- Start Remote Replication (Legacy) Synchronization
- Start Secure Physical Disk Erase
- Start Snapshot Rollback
- Start Snapshot Image Rollback
- Start SSD Cache Performance Modeling
- Start Storage Array Blink
- Start Storage Array Configuration Database Diagnostic
- Start Storage Array iSCSI Refresh
- Start Virtual Disk Initialization
- Stop Configuration Database Diagnostic
- Stop Consistency Group Snapshot Rollback
- Stop Consistency Group Snapshot Virtual Disk
- Stop Disk Group Blink
- Stop Disk Pool Locate
- Stop Enclosure Blink
- Stop Pending Snapshot Images On Consistency Group
- Stop Physical Disk Blink
- Stop Physical Disk Channel Blink
- Stop Physical Disk Channel Fault Isolation Diagnostics
- Stop Snapshot Group Image
- Stop Snapshot Group Pending Snapshot Images
- Stop Snapshot (Legacy)
- Stop Snapshot (Legacy) Rollback
- Stop Snapshot Rollback
- Stop Snapshot Image Rollback
- Stop Snapshot Virtual Disk
- Stop SSD Cache Performance Modeling
- Stop Storage Array Blink
- Stop Storage Array Configuration Database Diagnostic
- Stop Storage Array iSCSI Session
- Stop Storage Array Physical Disk Firmware Download
- Stop Virtual Disk Copy
- Suspend Remote Replication
- Suspend Remote Replication Group
- Suspend SSD Cache
- Test Remote Replication Group Connectivity
- Validate Storage Array Security Key
- Sample Script Files
- CLI Command Updates
| Recognized languages: | English Español Français |
|---|---|
| Pages: | 76 |
| Size: | 2.94 MB |
Show table of contents
Read manual
Document Outline
- Dell PowerVault MD3200 and MD3220 Storage Arrays
- Getting Started With Your System
- Introducción al sistema
- Getting Started With Your System
- Notes, Cautions, and Warnings
- Before You Begin
- Other Documentation and Media You May Need
- Supported Operating Systems
- Common Configurations
- Installation and Configuration
- Unpacking the System
- Installing the Rails and System in a Rack
- Connecting the Power Cable(s)
- Securing the Power Cable(s)
- Cabling Your Expansion Enclosure
- Turning On the Enclosure
- Installing the Bezel
- Installing the MD Storage Software
- 1 Insert the MD series resource media.
- 2 Select Install MD Storage Software.
- 3 Read and accept the license agreement.
- 4 Select one of the following installation options from the Install Set drop-down menu:
- 5 Select the MD storage array model(s) you are setting up to serve as data storage for this host server.
- 6 Choose whether to start the event monitor service automatically when the host server reboots or manually
- 7 Confirm the installation location and click Install.
- 8 If prompted, reboot the host server once the installation completes.
- 9 Start the MD Storage Manager and discover the array(s).
- 10 If applicable, activate any premium features purchased with your storage array. If you purchased premium features, see the printed activation card shipped with your storage array.
- Locating Your Service Tag
- NOM Information (Mexico Only)
- Technical Specifications
- Remarques, précautions et avertissements
- Avant de commencer
- Autre documentation et support dont vous pourriez avoir besoin
- Systèmes d'exploitation pris en charge
- Configurations courantes
- Installation et configuration
- Déballage du système
- Installation des rails et du système dans un rack
- Branchement du ou des câbles d'alimentation
- Fixation du ou des câbles d'alimentation
- Câblage de votre boîtier d'extension
- Mise sous tension du boîtier
- Installation du cadre
- Installation du logiciel MD Storage
- 1 Insérez le support Ressource série MD.
- 2 Sélectionnez Install MD Storage Software (Installer le logiciel de stockage MD).
- 3 Lisez le contrat de licence et acceptez-le.
- 4 Sélectionnez l'une des options d'installation suivantes dans le menu déroulant Install Set (Configuration d'installation) :
- 5 Sélectionnez le(s) modèle(s) de matrice de stockage MD que vous souhaitez définir comme stockage de données pour ce serveur hôte.
- 6 Choisissez de démarrer le service de moniteur des événements automatiquement lors du redémarrage du serveur hôte ou manuellement.
- 7 Confirmez l'emplacement de l'installation et cliquez sur Install (Installer).
- 8 En réponse à l'invitation (le cas échéant), redémarrez le serveur hôte une fois l'installation terminée.
- 9 Démarrez MD Storage Manager et lancez la détection des matrices.
- 10 Le cas échéant, activez les fonctions premium achetées avec votre matrice de stockage. Si vous avez acheté des fonctions premium, consultez la carte d'activation livrée avec votre matrice de stockage.
- Identification du numéro de service
- Informations NOM (Mexique uniquement)
- Caractéristiques techniques
- Notas, Avisos e Advertências
- Antes de começar
- Outros documentos e mídias dos quais você pode precisar
- Sistemas operacionais suportados
- Configurações comuns
- Instalação e configuração
- Remover o sistema da embalagem
- Instalar os trilhos e o sistema no rack
- Conectar o(s) cabo(s) de alimentação
- Prender o(s) cabo(s) de alimentação
- Cabeamento do gabinete de expansão
- Ligar o gabinete
- Instalar o bezel
- Instalar o software de armazenamento MD
- 1 Insira a mídia de recursos da série MD.
- 2 Selecione Install MD Storage Software.
- 3 Leia e aceite o contrato de licença.
- 4 Selecione uma das seguintes opções de instalação no menu suspenso Install Set (Conjunto de instalação):
- 5 Selecione o(s) modelo(s) de matriz de armazenamento MD que você está configurando como armazenamento de dados para este servidor host.
- 6 Indique se você quer começar a monitoração de eventos automaticamente quando o servidor é reinicializado ou manualmente.
- 7 Confirme o local de instalação e clique em Install.
- 8 Se for solicitado, reinicialize o servidor quando a instalação terminar.
- 9 Abra o aplicativo MD Storage Manager (Gerenciador de armazenamento MD) e faça a descoberta da(s) matriz(es).
- 10 Se for o caso, ative todos os recursos Premium comprados com a sua matriz de armazenamento. Se for o caso, consulte o cartão impresso de ativação que é fornecido com a sua matriz de armazenamento.
- Localizar a etiqueta de serviço
- Informações da norma NOM (apenas para o México)
- Especificações técnicas
- Notas, precauciones y avisos
- Antes de comenzar
- Documentación y soportes adicionales útiles
- Sistemas operativos admitidos
- Configuraciones comunes
- Instalación y configuración
- Desembalaje del sistema
- Instalación de los rieles y del sistema en un bastidor
- Conexión de los cables de alimentación
- Fijación de los cables de alimentación
- Cableado del gabinete de expansión
- Encendido del gabinete
- Instalación del bisel
- Instalación del software MD Storage
- 1 Inserte el soporte de recursos de la serie MD.
- 2 Seleccione Install MD Storage Software (Instalar el software MD Storage).
- 3 Lea y acepte el contrato de licencia.
- 4 Seleccione una de las siguientes opciones de instalación del menú desplegable Install Set (Conjunto de instalación):
- 5 Seleccione los modelos de matrices de almacenamientos MD que está configurando para que sirvan como almacenamiento de datos para este servidor host.
- 6 Elija si desea iniciar el servicio de monitor de eventos automática o manualmente al reiniciar el servidor host
- 7 Confirme la ubicación de la instalación y haga clic en Install (Instalar).
- 8 Si se le solicita, reinicie el servidor host tras completar la instalación.
- 9 Inicie MD Storage Manager y detecte las matrices.
- 10 Si se aplica, active cualquiera de las funciones premium adquiridas con la matriz de almacenamiento. Si ha adquirido una función premium, consulte la tarjeta de activación impresa enviada con la matriz de almacenamiento.
- Localización de la etiqueta de servicio
- Información de la NOM (sólo para México)
- Especificaciones técnicas
| Recognized languages: | English |
|---|---|
| Pages: | 272 |
| Size: | 7.55 MB |
Show table of contents
Read manual
Document Outline
- Introduction
- Planning: About Your Storage Array
- Planning: RAID Controller Modules
- Planning: MD3200 Series Storage Array Terms and Concepts
- Configuration: Overview
- Configuration: About Your Storage Array
- Out-of-Band and In-Band Management
- Storage Arrays
- Adding Storage Arrays
- Setting Up Your Storage Array
- Locating Storage Arrays
- Naming or Renaming Storage Arrays
- Setting a Password
- Viewing Storage Array Connections
- Adding/Editing a Comment to an Existing Storage Array
- Removing Storage Arrays
- Enabling Premium Features
- Failover Alert Display
- Changing the Cache Settings on the Storage Array
- Changing Expansion Enclosure ID Number
- Changing the Enclosure Order in the Physical Pane
- Configuring Alert Notifications
- Battery Settings
- Configuration: Event Monitor
- Configuration: About Your Host
- Configuration: Disk Groups and Virtual Disks
- Creating Disk Groups and Virtual Disks
- Choosing an Appropriate Physical Disk Type
- Physical Disk Security with Self Encrypting Disk
- Configuring Hot Spare Physical Disks
- Enclosure Loss Protection
- Host-to-Virtual Disk Mapping
- Creating Host-to-Virtual Disk Mappings
- Modifying and Removing Host-to-Virtual Disk Mapping
- Changing Controller Ownership of the Virtual Disk
- Removing Host-to-Virtual Disk Mapping
- Changing the RAID Controller Module Ownership of a Disk Group
- Changing the RAID Level of a Disk Group
- Removing a Host-to-Virtual Disk Mapping Using Linux DMMP
- Restricted Mappings
- Changing the RAID Level of a Disk Group
- Storage Partitioning
- Disk Group and Virtual Disk Expansion
- Disk Group Migration
- Import Disk Group
- Storage Array Media Scan
- Configuration: Premium Feature- Snapshot Virtual Disks
- Scheduling a Snapshot Virtual Disk
- Creating a Snapshot Virtual Disk Using the Simple Path
- Creating a Snapshot Virtual Disk Using the Advanced Path
- Specifying Snapshot Virtual Disk Names
- Snapshot Repository Capacity
- Disabling a Snapshot Virtual Disk
- Re-creating Snapshot Virtual Disks
- Snapshot Rollback
- Configuration: Premium Feature- Virtual Disk Copy
- Types of Virtual Disk Copies
- Creating a Virtual Disk Copy for an MSCS Shared Disk
- Virtual Disk Read/Write Permissions
- Virtual Disk Copy Restrictions
- Creating a Virtual Disk Copy
- Preferred RAID Controller Module Ownership
- Failed RAID Controller Module
- Copy Manager
- Copying the Virtual Disk
- Storage Array Performance During Virtual Disk Copy
- Setting Copy Priority
- Stopping a Virtual Disk Copy
- Recopying a Virtual Disk
- Removing Copy Pairs
- Configuration: Premium Feature- Upgrading to High-Performance- Tier
- Configuration: Device Mapper Multipath for Linux
- Management: Firmware Downloads
- Downloading RAID Controller and NVSRAM Packages
- Downloading Both RAID Controller and NVSRAM Firmware
- Downloading Only NVSRAM Firmware
- Downloading Physical Disk Firmware
- Downloading MD1200 Series Expansion Module EMM Firmware
- Self-Monitoring Analysis and Reporting Technology (SMART)
- Media Errors and Unreadable Sectors
- Management: Installing Array Components
- Management: Firmware Inventory
- Management: System Interfaces
- Troubleshooting: Your Storage Array Software
- Start-Up Routine
- Device Health Conditions
- Storage Array Support Data
- Automatically Collect the Support Bundle Data
- Collecting the Physical Disk Data
- Event Log
- Recovery Guru
- Storage Array Profile
- Viewing the Logical Associations
- Viewing the Physical Associations
- Finding Nodes
- Using Go To
- Recovering From an Unresponsive Storage Array Condition
- Locating a Physical Disk
- Locating an Expansion Enclosure
- Capturing the State Information
- SMrepassist Utility
- Unidentified Devices
- Recovering From an Unidentified Storage Array
- Starting or Restarting the Host Context Agent Software
- Troubleshooting: Your Array
- Safety First-For you and Your Array
- Troubleshooting Storage Array Startup Failure
- Troubleshooting Loss of Communication
- Troubleshooting External Connections
- Troubleshooting Power Supply/Cooling Fan Module
- Troubleshooting Array Cooling Problems
- Troubleshooting Expansion Enclosure Management Modules
- Troubleshooting RAID Controller Modules
- Troubleshooting Hard Drives
- Troubleshooting Array and Expansion Enclosure Connections
- Troubleshooting a Wet Storage Array
- Troubleshooting a Damaged Array
- Troubleshooting RAID Controller Modules
- Getting Help
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 74 |
| Size: | 2.24 MB |
Show table of contents
Read manual
Document Outline
- Deployment Guide
- Introduction
- Hardware Installation
- Installing PowerVault MD Storage Software
- Post Installation Tasks
- Uninstalling PowerVault MD Storage Software
- Getting Help
- Appendix-Load Balancing
- Appendix-Manual Configuration of iSCSI
- Step 1: Discover the Storage Array (Out-of-band Management Only)
- Step 2: Configure the iSCSI Ports on the Storage Array
- Step 3: Perform Target Discovery From the iSCSI Initiator
- Step 4: Configure Host Access
- Understanding CHAP Authentication
- Step 5: Configure CHAP Authentication on the Storage Array (Optional)
- Step 6: Configure CHAP Authentication on the Host Server (Optional)
- Step 7: Connect to the Target Storage Array From the Host Server
- Step 8: (Optional) Set Up In-Band Management
| Recognized languages: | English Čeština Français Deutsch Polszczyzna Русский Español |
|---|---|
| Pages: | 32 |
| Size: | 855 KB |
Show table of contents
Read manual
Document Outline
- Airborne Contaminant Level Update
- 气载污染物级别更新
- 空氣中懸浮污染物級別更新
- Aktualizace úrovně uvolňování znečišt’ujících látek do vzduchu
- Mise à jour des contaminants en suspension dans l'air
- Aktualisierung zur Luftverschmutzungsklasse
- Ενηµέρωση επιπέδων αεροµεταφερόµενων ρύπων
- Pembaruan Tingkat Pencemaran Udara
- 空気汚染物質レベルのアップデート情報
- 공기 중 오염 물질 수준 업데이트
- Aktualizacja danych o poziomie zanieczyszczeń w powietrzu
- Atualização do nível de poluentes transportados pelo ar
- Обновление информации об уровне загрязняющих веществ в атмосфере
- Actualización del nivel de contaminación atmosférica
- Havadan Geçen Madde Düzeyi Güncelleme
- ןוכדע יבגל תמר םוהיז ריו
| Recognized languages: | English Čeština Français Deutsch Polszczyzna Русский Español |
|---|---|
| Pages: | 32 |
| Size: | 855 KB |
Show table of contents
Read manual
Document Outline
- Airborne Contaminant Level Update
- 气载污染物级别更新
- 空氣中懸浮污染物級別更新
- Aktualizace úrovně uvolňování znečišt’ujících látek do vzduchu
- Mise à jour des contaminants en suspension dans l'air
- Aktualisierung zur Luftverschmutzungsklasse
- Ενηµέρωση επιπέδων αεροµεταφερόµενων ρύπων
- Pembaruan Tingkat Pencemaran Udara
- 空気汚染物質レベルのアップデート情報
- 공기 중 오염 물질 수준 업데이트
- Aktualizacja danych o poziomie zanieczyszczeń w powietrzu
- Atualização do nível de poluentes transportados pelo ar
- Обновление информации об уровне загрязняющих веществ в атмосфере
- Actualización del nivel de contaminación atmosférica
- Havadan Geçen Madde Düzeyi Güncelleme
- ןוכדע יבגל תמר םוהיז ריו