Konica Minolta bizhub C650 Instruction Manuals and User Guides
We have 23 Instruction Manuals and User Guides for bizhub C650 Konica Minolta
Manuals
Read manual
Read manual
Read manual
Read manual
| Recognized languages: | English |
|---|---|
| Pages: | 56 |
| Size: | 1.36 MB |
Show table of contents
Read manual
Document Outline
- Contents
- About this Product
- Trademarks and registered trademarks
- LICENSE ISSUES
- 1 Introduction
- 2 Installation of Log Management Utility
- 3 Starting Log Management Utility
- 4 Log Confirmation
- 5 Log Management Utility Settings
- 6 Error message list
| Recognized languages: | English |
|---|---|
| Pages: | 28 |
| Size: | 1.56 MB |
| Recognized languages: | English |
|---|---|
| Pages: | 280 |
| Size: | 9.71 MB |
Show table of contents
Read manual
Document Outline
- Introduction
- 1 Overview of the User Box functions
- 2 Saving documents
- 2.1 Information on saving documents
- 2.2 Authentication and user boxes that can be accessed
- When user authentication and account track settings are not specified
- When only user authentication settings are specified
- When only account track settings are specified
- When user authentication and account track settings are specified and synchronized
- When user authentication and account track settings are specified, but not synchronized
- 2.3 Saving copies in user boxes
- 2.4 Saving scans in user boxes
- 2.5 Saving printouts in user boxes
- 2.6 Specifying scan settings
- 2.7 Display and operation of the left panel
- Job List
- Job List - Delete
- Job List - Job Details
- Settings when saving documents
- Detail - Check Scan Settings
- Detail - Check Original Settings
- Settings when using documents
- Detail
- Check Job Settings
- Check Job Settings - Destination Settings
- Check Job Settings - E-Mail Settings
- Preview
- Preview - Detail
- Preview - Detail (Print/Combine)
- Preview - Detail (Send/Bind TX)
- 3 Organizing user box documents
- 4 Printing a user box document
- 4.1 Overview of document printing
- 4.2 Printing
- Available print settings
- To print a document
- Changing the number of copies
- Specifying single-sided/double-sided printing
- Specifying Finishing settings
- Adding a binding margin
- Adding cover pages (Cover Sheet)
- Adding insertions (Insert Sheet)
- Inserting chapter title pages (Chapters)
- Printing the date/time (Date/Time)
- Printing page numbers (Page Number)
- Adding preset text or images (Stamp)
- Adding text and images to prevent copying (Copy Protect)
- Adding repeated preset text or images (Stamp Repeat)
- Inserting a header/footer (Header/Footer)
- 4.3 Combined printing
- 5 Sending a user box document
- 5.1 Overview of document transmissions
- 5.2 Specifying the destination
- Selecting from the address book
- Selecting from a group destination
- Searching for a destination
- Directly specifying an e-mail destination
- Directly specifying an SMB destination
- Directly specifying an FTP destination
- Directly specifying a WebDAV destination
- Selecting a destination with an Address search
- 5.3 Specifying the transmission settings
- Settings that can be specified
- File Type
- E-Mail Settings (Communication Settings)
- URL Notification Setting (Communication Settings)
- E-Mail Encryption (Communication Settings)
- Digital Signature (Communication Settings)
- Date/Time (Application)
- Page Number (Application)
- Stamp (Application)
- Header/Footer (Application)
- Send & Print (Application)
- 5.4 Bind TX
- 5.5 Checking settings before sending
- 6 Printing/sending a system user box document
- 7 Specifying Utility mode parameters
- 8 Appendix
- 9 Index
| Recognized languages: | English |
|---|---|
| Pages: | 44 |
| Size: | 1.05 MB |
Show table of contents
Read manual
Document Outline
- Contents
- 1 Introduction
- 2 Device description
- 3 Using Authentication Unit (Biometric Type) AU-101
- 4 Care of Authentication Unit (Biometric Type) AU-101
- 5 Specifications
- 6 Troubleshooting
| Recognized languages: | English |
|---|---|
| Pages: | 304 |
| Size: | 9.09 MB |
Show table of contents
Read manual
Document Outline
- Introduction
- 1 Before using scanning functions
- 2 Scanning
- 2.1 Control panel
- 2.2 Fax/Scan mode screen
- 2.3 Display and operation of the left panel
- Job List
- Job List - Delete
- Job List - Job Details
- Check Job - Check Job Settings
- Check Job - Check Job Settings - Destination Settings
- Check Job - Check Job Settings - Scan Settings
- Check Job - Check Job Settings - Original Settings
- Check Job - Check Job Settings - Check E-Mail Settings
- Check Job - Delete
- 2.4 Previewing
- 2.5 Using Scan/Fax programs
- 2.6 Sending data in an e-mail message (Scan to E-Mail)
- 2.7 Sending data to a computer on the network (Scan to SMB)
- 2.8 Sending data to a server (Scan to FTP)
- 2.9 Sending data to a server (WebDAV)
- 2.10 Using Web Service
- 2.11 Specifying scan and transmission settings (Scan Settings/Original Settings/Communication Settings)
- Settings that can be specified
- Original Type
- Simplex/Duplex
- Resolution
- File Type
- Density
- Separate Scan
- Color (Quality Adjustment)
- Background Removal (Quality Adjustment)
- Sharpness (Quality Adjustment)
- Frame Erase (Erase)
- Book Copy (Book Scan)
- Scan Size (Application)
- Annotation (Application)
- Date/Time (Application)
- Page Number (Application)
- Stamp (Application)
- Header/Footer (Application)
- Send & Print (Application)
- Document Name
- Original Settings
- E-Mail Setting
- URL Notification Setting
- E-Mail Encryption
- Digital Signature
- 3 Specifying Utility mode parameters
- 3.1 Settings that can be specified from Utility mode
- 3.2 Displaying settings screens
- 3.3 Registering an address book destination
- 3.4 Registering a group destination
- 3.5 Specifying e-mail settings
- 3.6 Limiting Access to Destinations
- 3.7 Custom Display Settings
- 3.8 Scan/Fax Settings
- 3.9 Reset Data After Job
- 3.10 Header/Footer Settings
- 3.11 Printing registered destination lists
- 3.12 Open API Settings
- 4 Network Settings
- 4.1 Available Network Settings parameters
- 4.2 Network settings with external server authentication
- 4.3 TCP/IP Settings
- 4.4 NetWare Settings
- 4.5 http Server Settings
- 4.6 FTP Settings
- 4.7 SMB Settings
- 4.8 LDAP Settings
- 4.9 E-Mail TX (SMTP)
- 4.10 E-Mail RX (POP)
- 4.11 S/MIME Communication Settings
- 4.12 SNMP Settings
- 4.13 AppleTalk Settings
- 4.14 Bonjour Settings
- 4.15 TCP Socket Settings
- 4.16 WebDAV Client Settings
- 4.17 WebDAV Server Settings
- 4.18 Web Service Settings
- 4.19 Device Setting
- 4.20 Time Adjustment Setting
- 4.21 Status Notification Setting
- 4.22 Total Counter Notification Settings
- 4.23 PING Confirmation
- 4.24 SLP Setting
- 4.25 LPD Setting
- 4.26 Prefix/Suffix Setting
- 4.27 Action for Invalid Certificate
- 5 Scan function troubleshooting
- 6 Appendix
- 7 Index
| Recognized languages: | English |
|---|---|
| Pages: | 189 |
| Size: | 4.94 MB |
Show table of contents
Read manual
Document Outline
- Contents
- 1 Introduction
- 2 Basic operations
- 3 Authentication Manager
- 3.1 User List
- 3.1.1 Available operations in the User List page
- 3.1.2 Viewing the user list
- 3.1.3 Specifying display settings for the user list
- 3.1.4 Registering a new user
- 3.1.5 Editing user information
- 3.1.6 Editing information of multiple users
- 3.1.7 Deleting a user
- 3.1.8 Importing data
- 3.1.9 Importing from a file
- 3.1.10 Creating an import file
- 3.1.11 Creating a deletion file
- 3.1.12 Checking the import result
- 3.1.13 Importing from a device
- 3.1.14 Checking the import result
- 3.1.15 Importing from an external server
- 3.1.16 Checking the import result
- 3.1.17 Deleting a user according to the external server
- 3.1.18 Exporting data
- 3.1.19 Editing an exported file
- 3.2 User Counter
- 3.3 Account Track List
- 3.3.1 Available operations in the Account Track List page
- 3.3.2 Displaying the account track list
- 3.3.3 Registering a new account
- 3.3.4 Editing an account
- 3.3.5 Deleting an account
- 3.3.6 Importing data
- 3.3.7 Importing from a file
- 3.3.8 Creating a file to be imported
- 3.3.9 Creating a deletion file
- 3.3.10 Checking the import result
- 3.3.11 Importing from a device
- 3.3.12 Checking the import result
- 3.3.13 Exporting data
- 3.4 Account Track Counter
- 3.5 Specifying a function permission template
- 3.6 Specifying a function permission
- 3.7 Specifying a user group
- 3.8 Account Group Settings
- 3.9 Specifying a template
- 3.10 Specifying an external server
- 3.11 Managing a specific device
- 3.11.1 Editing device settings
- 3.11.2 Function Permission Setting for Public User
- 3.11.3 SSFC Authentication Settings
- 3.11.4 Specifying a list (User name)
- 3.11.5 Specifying a list (Account name)
- 3.11.6 Specifying a list (External server name)
- 3.11.7 Registering a specific device
- 3.11.8 Unregistering a specific device
- 3.11.9 Checking the result of registering or unregistering a specific device
- 3.12 IC card information
- 3.13 IC Card Authentication Setting
- 3.14 IC Card Information Template Settings
- 3.15 Biometric information
- 3.16 Bio Auth Setting
- 3.17 Biometric Authentication Server Setting
- 3.18 Changing the password
- 3.19 Checking the Biometric Unit No.
- 3.20 Specifying an administrator
- 3.21 Specifying a group manager
- 3.22 Version
- 3.23 Using with Account Manager
- Precautions for use with Account Manager
- 3.23.1 Real-time Upper Limit Settings
- 3.23.2 Operation when the Real-time Upper Limit Settings is enabled
- 3.23.3 Device panel display when logging on
- If the residual number of pages for a user is greater than the reserved number of printable pages when a user uses the device:
- If the residual number of pages by a user is smaller than the reserved number of printable pages when a user uses the device:
- If the residual number of pages by a user group is greater than the reserved number of printable pages when a user uses the device:
- 3.24 Precautions on using Gateway for Biometric Authentication Manager
- 3.25 Operation for authentication
- 3.1 User List
- 4 Setting by Purpose
- 4.1 Performing device authentication using Authentication Manager
- 4.2 Restricting available device functions by user group or user
- 4.3 Switching available functions between devices in the account track to which a user belongs and devices in other account tracks
- 4.4 Linking with an existing Active Directory for authentication
- 4.5 Simplifying authentication with IC card
- 4.6 Easily registering new card information for a user who lost an IC card
- 4.7 Easily registering a card already registered as one of other user
- 4.8 Using biometric authentication to enhance security level
- 4.9 Using Public User
- 4.10 Changing your password
- 4.11 Performing counter management by job or work besides user
- 5 Troubleshooting
| Recognized languages: | English |
|---|---|
| Pages: | 38 |
| Size: | 1.49 MB |
Show table of contents
Read manual
Document Outline
- Chapter01a.pdf
- Chapter02a.pdf
- 2 Device description
- 2.1 Part names and their functions
- 2 Device description
- Chapter03a.pdf
- Chapter04a.pdf
- Chapter05a.pdf
- Chapter06a.pdf
| Recognized languages: | English |
|---|---|
| Pages: | 29 |
| Size: | 255 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 37 |
| Size: | 3.13 MB |
Show table of contents
Read manual
| Recognized languages: | English |
|---|---|
| Pages: | 42 |
| Size: | 633 KB |
Show table of contents
Read manual
Document Outline
- Contents
- About this product
- Trademarks and registered trademarks
- 1 Introduction
- 2 Installing License Install Utility
- 3 Using License Install Utility
- 3.1 Starting License Install Utility
- 3.2 Exiting License Install Utility
- 3.3 Main window
- 3.4 Registering devices
- 3.5 Specifying the search range
- 3.6 Registering an active token certificate
- 3.7 License Management Settings
- 3.8 Displaying the license code
- 4 Appendix
| Recognized languages: | English |
|---|---|
| Pages: | 12 |
| Size: | 752 KB |
Show table of contents
Read manual
| Recognized languages: | English |
|---|---|
| Pages: | 7 |
| Size: | 1.79 MB |
| Recognized languages: | English |
|---|---|
| Pages: | 65 |
| Size: | 2.99 MB |
Show table of contents
Read manual
Document Outline
- Contents
- About this product
- Trademarks and registered trademarks
- 1 Foreword
- 2 Installing the Setup Utility for RightFax
- 3 Writing an application to a multifunctional peripheral
- 4 Using an application
- 4.1 Reading an application
- 4.2 Description of the Application Registration window
- 4.3 Device Information page
- 4.4 Application Information page
- 4.5 Server Setting page
- 4.6 Extension Setting page
- 4.7 Scan Setting page
- 4.8 Notification Setting page
- 4.9 Registering new applications
- 4.10 Saving an application as a file
- 5 Managing RightFax server information
- 6 Managing the information for multifunctional peripherals
- 7 Retrieving the job history
- 8 Writing an address book to a multifunctional peripheral
| Recognized languages: | English |
|---|---|
| Pages: | 303 |
| Size: | 9.35 MB |
Show table of contents
Read manual
Document Outline
- Introduction
- NetFront statement
- OpenSSL statement
- NetSNMP License
- Kerberos
- Mersenne Twister
- Copyright
- SOFTWARE LICENSE AGREEMENT
- About Adobe Color Profile
- ICC Profile for TOYO INK Standard Color on Coated paper (TOYO Offset Coated 2.0)
- DIC STANDARD COLOR PROFILE LICENSE AGREEMENT
- Contents
- About this user’s guide
- User’s Guides
- 1 Overview
- 2 Installing the printer driver
- 2.1 Printer drivers and supported operating systems
- 2.2 When used with Windows
- Automatic installation using the installer
- To install the printer driver
- Installing the printer driver using the Add Printer Wizard
- For Windows XP/Server 2003
- For Windows Vista
- When using Web service printing under Windows Vista
- For Windows 2000/NT 4.0
- Installing the printer driver using Plug and Play
- For Windows 2000
- For Windows XP/Server 2003
- For Windows Vista
- Uninstalling the printer driver
- When the printer driver contains the delete function
- When the printer driver does not contain the delete function
- 2.3 When used with Macintosh
- 3 Setting up network printing
- 3.1 Overview of network functions
- 3.2 Setting the IP address for this machine
- 3.3 Accessing PageScope Web Connection
- 3.4 SMB printing
- 3.5 LPR printing
- 3.6 Port 9100 printing (Windows 2000/XP/Server 2003/Vista)
- 3.7 IPP printing (Windows 2000/XP/Server 2003/Vista)
- 3.8 Printing with NetWare
- Network printing in a NetWare environment
- For Remote Printer mode with NetWare 4.x bindery emulation
- For Print Server mode with NetWare 4.x bindery emulation
- For NetWare 4.x Remote Printer mode (NDS)
- For NetWare 4.x/5.x/6 Print Server mode (NDS)
- For NetWare 5.x/6 Novell Distributed Print Service (NDPS)
- Specifying client (Windows) settings when using the NetWare server
- 3.9 Printing with Macintosh
- 4 Various printing methods
- 4.1 Printing operations
- 4.2 Setting the printing functions
- Function list
- Function overview
- Original Orientation
- Original Size and Paper Size
- Zoom (enlargement and reduction)
- Paper Tray (paper source)
- Paper Type
- Output Method (job management)
- User Authentication
- Account Track
- Collate and Offset
- Combination/Poster Mode
- Skip Blank Pages (saving paper)
- Chapters
- Print Type (duplex printing/booklet printing)
- Image Shift
- Stapling and hole punching
- Center Staple and Fold/Fold
- Paper Arrangement
- Cover Mode and Transparency Interleave
- Per Page Setting
- Watermark
- Overlay
- Copy Protect
- Date/Time and Page Number
- Header/Footer
- Quality Adjustment
- Use Printer Fonts (substitute fonts)
- 4.3 Specifying the printer driver basic settings
- 5 Setting up the PCL driver (Windows)
- 5.1 Settings
- 5.2 Specifying the Basic tab settings
- 5.3 Specifying the Layout tab settings
- 5.4 Specifying the Finish tab settings
- 5.5 Specifying the Cover Mode tab settings
- 5.6 Specifying the Stamp/Composition tab settings
- 5.7 Specifying the Quality tab settings
- 5.8 Specifying the Other tab settings
- 5.9 Specifying the Configure tab settings
- 5.10 Specifying the Settings tab settings
- 5.11 Saving the driver settings
- 6 Setting up the PostScript driver (Windows)
- 6.1 Settings
- 6.2 Specifying the Basic tab settings
- 6.3 Specifying the Layout tab settings
- 6.4 Specifying the Finish tab settings
- 6.5 Specifying the Cover Mode tab settings
- 6.6 Specifying the Stamp/Composition tab settings
- 6.7 Specifying the Quality tab settings
- 6.8 Specifying the Other tab settings
- 6.9 Specifying the Configure tab settings
- 6.10 Specifying the Settings tab settings
- 6.11 Saving the driver settings
- 7 Setting up the PPD driver (Mac OS 9.2)
- 8 Setting up the PPD driver (Mac OS X)
- 9 Function detail description
- 9.1 Proof print
- 9.2 Secure print
- 9.3 Save in User Box
- 9.4 Printing on a machine with the user authentication set up
- 9.5 Printing with the machine enabling the Account Track function
- 9.6 ID & Print
- 9.7 Specifying a user-defined encryption passphrase
- 9.8 ICC profile settings
- 9.9 Registering ICC profiles in the printer driver
- 10 Various settings
- 10.1 Print settings in Utility mode
- Default settings
- To display the User Settings screen
- PDL Setting
- Number of Copies
- Original Direction
- Spool setting
- Paper size change
- Banner Sheet Setting
- Binding Direction Adjustment
- Line Width Adjustment
- Paper Tray
- Paper Size
- 2-Sided Print
- Binding Position
- Staple
- Punch
- Banner Paper Tray
- Font Settings
- Symbol Set
- Font Size
- Line/Page
- CR/LF Mapping
- Print PS Errors
- ICC Profile Settings
- Verify XPS Digital Signature
- Print Reports
- 10.2 Print settings in Administrator mode
- To display the Administrator Settings screen
- Print/Fax Output Setting
- Output Tray Setting
- To delete secure print documents
- To specify the secure document delete time
- To specify the ID & Print Delete Time
- ID & Print Settings
- ID & Print Operation Settings
- Printing without specifying the authentication setting
- I/F Timeout
- Print XPS Errors
- Authentication Setting for the OpenAPI Settings
- Print Data Capture
- Driver Password Encryption Setting
- 10.1 Print settings in Utility mode
- 11 Troubleshooting
- 12 Appendix
- 13 Index
| Recognized languages: | English |
|---|---|
| Pages: | 68 |
| Size: | 2.43 MB |
| Recognized languages: | English |
|---|---|
| Pages: | 361 |
| Size: | 11.57 MB |
Show table of contents
Read manual
Document Outline
- Contents
- Introduction
- Special Notice to User
- Send a fax (Faxing)
- Available features
- Attaching and sending the total page count
- Sending a fax at a specified time
- Sending one scanned page at a time (Quick Memory TX)
- Overseas faxing
- Confirming whether the original has been scanned or not
- Erasing shadows
- Specifying a scanning area size on the original
- Sending originals of different sizes with one operation
- Sending an original with fold lines
- Sending long originals
- Sending double-paged originals
- Specifying the binding position of double-sided originals
- Sending faxes by command from the recipient
- Releasing ECM mode
- Specifying an original for polling
- Releasing Super G3 Mode
- Specifying a relay destination
- Using a confidential box
- Sending password-protected faxes
- Adjusting the background color density
- Emphasizing character edges
- Saving to a box
- Explanation of manual conventions
- Descriptions of original documents and paper
- User’s guides
- 1 Before using this machine
- 2 To send a fax
- 2.1 General fax operation
- 2.2 Loading the original
- 2.3 Specifying scanning conditions
- 2.4 Specifying only one destination
- Specifying from registered destinations
- Searching for a registered destination (Index button)
- Searching for a registered destination (Address Type)
- Searching for registered destinations (Detail Search)
- Specifying by direct input
- Specifying from the job history
- Performing an LDAP search (Search)
- Performing an LDAP search (Advanced Search)
- 2.5 Specifying multiple destinations (Sequential broadcast transmission or broadcast transmission)
- 2.6 Sending a fax using a program destination
- 2.7 Checking the settings
- 2.8 Operations while scanning
- 2.9 When unable to send fax
- 2.10 Reserving a transmission
- 2.11 Sending a fax while confirming the status of the recipient’s machine (Manual transmission).
- 2.12 Aborting transmission
- 2.13 Checking reserved jobs to be transmitted
- 2.14 Checking transmission results
- 2.15 Memory transmission and quick memory transmission
- 2.16 Attaching the total page count to a sent fax (Total # of Pages)
- 2.17 Sending a fax after specifying a time (Timer TX)
- 2.18 Faxing overseas (Overseas TX)
- 2.19 Fax Header Settings
- 2.20 Faxing after previewing
- 3 Reception
- 4 Troubleshooting
- 5 Specifications
- 6 Useful transmission functions
- 6.1 List of functions on the Settings screen
- 6.2 Sending a fax after adjusting the density of background color (Background Removal)
- 6.3 Sending the fax after emphasizing the character edges (Sharpness)
- 6.4 Sending the fax after removing the black shadow (Frame Erase)
- 6.5 Sending double page originals page by page from right to left (Book Copy)
- 6.6 Sending a fax after specifying the scan size of the original (Scan Size)
- 6.7 Copying the original at the same time as sending the Fax (Send & Print)
- 6.8 Confirming that the original is scanned (TX Stamp)
- 6.9 Sending an original of varying sizes by a single operation (Mixed Original)
- 6.10 Sending an original with folds (Z-Folded Original)
- 6.11 Sending a long original (Long Original)
- 6.12 Specifying the binding position (Binding Position)
- 6.13 Faxing by reducing the effect of dust from the left partition glass (Despeckle)
- 6.14 Sending a fax after cancelling ECM mode (ECM OFF)
- 6.15 Sending a fax after cancelling Super G3 mode (V. 34 OFF)
- 6.16 Sending an original in Public/Personal/Group box by fax
- 6.17 Check the recipient’s machine and send the fax (Check Dest. & Send)
- 6.18 Sending the fax after reconfirming the destination (Destination Check Display Function)
- 6.19 Sending the fax after specifying the telephone line (Select Line settings)
- 6.20 Sending the fax with the password (Password TX)
- 6.21 Confidential transmission (F-Code TX)
- 6.22 Sending the fax after specifying the relay destination (F-Code TX)
- 6.23 Specifying the way of adding the transmission source information (Fax Header Settings)
- 7 Useful reception functions
- 8 Polling
- 9 Registering/Specifying Settings
- 9.1 Displaying the fax registration screen
- 9.2 Registering the Address Book
- 9.3 Registering Group destinations
- 9.4 Registering Program destinations
- 9.5 Changing the destination level (Apply Levels/Groups to Destinations)
- 9.6 Confidential box settings
- 9.7 Specifying bulletin board settings
- 9.8 Specifying Relay box settings
- 9.9 Setting Memory RX User Box
- 10 Utility mode
- 10.1 Utility mode operation
- 10.2 Utility mode list
- User Settings > Custom Display Settings > Scan/Fax Settings
- User Settings > Custom Display Settings > FAX Active Screen operation
- User Settings > Custom Display Settings > Search Option Settings
- User Settings > Scan/Fax Settings > Default Scan/Fax Settings
- Administrator Settings > System Settings > Power Save Settings
- Administrator Settings > System Settings > Output Settings > Print/Fax Output Settings
- Administrator Settings > System Settings > Restrict User Access > Restrict Access to Job Settings > Registering and Changing Address
- Administrator Settings > System Settings > Restrict User Access > Restrict Operation > Restrict Broadcasting
- Administrator Settings > System Settings > Reset Settings > Job Reset > Next Job > Reset Data After Job
- Administrator Settings > System Settings > Stamp Settings
- Administrator Settings > User Authentication/Account Track > Limiting Access to Destinations
- Administrator Settings > Fax Settings > Header Information
- Administrator Settings > Fax Settings > Header/Footer Position
- Administrator Settings > Fax Settings > Line Parameter Settings
- Administrator Settings > Fax Settings > TX/RX Settings
- Administrator Settings > Fax Settings > Function Settings > Function ON/OFF Setting
- Administrator Settings > Fax Settings > Function Settings > Memory RX Settings
- Administrator Settings > Fax Settings > Function Settings > Closed Network RX
- Administrator Settings > Fax Settings > Function Settings > Forward TX Setting
- Administrator Settings > Fax Settings > Function Settings > Incomplete TX Hold
- Administrator Settings > Fax Settings > Function Settings > PC-FAX RX Setting
- Administrator Settings > Fax Settings > Function Settings > TSI User Box Setting
- Administrator Settings > Fax Settings > PBX Connection Setting
- Administrator Setting > Fax Setting > Report Settings
- Administrator Settings > Fax Settings > Job Settings List
- Administrator Settings > Fax Settings > Multi Line Settings > Line Parameter Setting
- Administrator Settings > Fax Settings> Multi Line Settings > Function Settings
- Administrator Settings > Fax Setting > Multi Line Settings > Multi Line Settings
- Administrator Settings > Fax Settings > Multi Line Settings > Sender Fax No.
- Administrator Settings > Security Settings > Security Details > Manual Destination Input
- Administrator Settings > Security Settings > Security Details > Restrict Fax TX
- Administrator Settings > Security Settings > Security Details > Hide Personal Information
- Administrator Settings > Security Settings > Security Details > Display Activity Log
- 10.3 Setting the initial state of Fax/Scan screen (Scan/Fax Settings)
- 10.4 Setting the screen during fax operation (FAX Active Screen)
- 10.5 Specifying differentiation of uppercase/lowercase letters when searching destinations (Search Option Settings)
- 10.6 Setting initial setting value of fax function (Default Scan/Fax Setting)
- 10.7 Specifying the power save transition conditions (Enter Power Save Mode)
- 10.8 Setting the printing method for received original (Print/Fax Output Settings)
- 10.9 Specifying the prohibitions to cause a change in destination registration (Registering and Changing Addresses)
- 10.10 Setting prohibitions for sending a fax to multiple destinations (Restrict Broadcasting)
- 10.11 Specifying whether to reset the destination and settings (Reset Data After Job)
- 10.12 Specifying stamp printing specifications (Stamp Settings)
- 10.13 Protecting the destination information (Limiting Access to Destinations)
- 10.14 Registering transmission source name and fax number (Header Information)
- 10.15 Specifying the method of setting the transmission source/reception information (Header/Footer Position)
- 10.16 Specifying transmission/receiving mode (Line Parameter Settings)
- 10.17 Settings of transmission and reception mode (TX/RX Settings)
- 10.18 Specifying the ON/OFF settings of the function (Function ON/OFF Setting)
- 10.19 Specifying memory reception settings (Memory RX Settings)
- 10.20 Reception settings only for the specific caller (Closed Network RX)
- 10.21 Forwarding the received original (Forward TX Setting)
- 10.22 Specifying the resending (Incomplete TX Hold)
- 10.23 Specifying the reception in box of hard disk (PC-FAX RX Setting)
- 10.24 Distributing the received original per sender (TSI User Box Setting)
- 10.25 Specifying the function related to private branch exchange (PBX Connection Setting)
- 10.26 Specifying the printing methods for report (Report Setting)
- 10.27 Specifying the extended telephone line parameter settings (Lines Parameter Setting)
- 10.28 Specifying the extended telephone line function settings (Function Settings)
- 10.29 Specifying the communication methods of Extended telephone lines (Multi Line Settings)
- 10.30 Specifying the fax number of Extended telephone line (Sender Fax No.)
- 10.31 Prohibiting the direct input of fax number (Manual Destination Input)
- 10.32 Prohibiting the Fax sending function (Restrict Fax TX)
- 10.33 Specifying settings such that fax number cannot be displayed (Hide Personal Information)
- 10.34 Specifying settings such that communication history cannot be displayed (Display Activity Log)
- 11 Reports and Lists
- 11.1 Report / List Types
- 11.2 Activity Report
- 11.3 TX Result Report
- 11.4 Polling TX Report
- 11.5 Polling RX Report
- 11.6 Sequential Polling RX Report
- 11.7 Reservation Communication Report
- 11.8 Reservation Polling TX Report
- 11.9 Broadcast Reserved Report
- 11.10 An address Polling RX Reserved Report
- 11.11 Sequence Polling Rx Reserved Report
- 11.12 Confidential RX Report
- 11.13 Bulletin board transmission report (Polling TX Report)
- 11.14 Relay TX Result Report
- 11.15 Relay Request Report
- 11.16 PC-FAX TX Error Report
- 11.17 Broadcast Report
- 11.18 Speed Dial List (Address Book destination list)
- 11.19 Group Address List
- 11.20 Program List
- 11.21 Fax Setting List
- 12 Appendix
- 13 Index
| Recognized languages: | English |
|---|---|
| Pages: | 82 |
| Size: | 3.00 MB |
Show table of contents
Read manual
Document Outline
- Introduction
- 1 Overview
- 2 Assignment of application keys
- 3 Web browser function
- 4 PageScope Web Connection (Web browser function)
- 5 Image Panel
- 6 Photo registration
- 7 PDF process functions
- 8 My Panel functions
- 8.1 Overview
- 8.2 Displaying My Panel
- 8.3 Customizing My Panel
- 9 My Address Book function
- 10 Index
| Recognized languages: | English |
|---|---|
| Pages: | 192 |
| Size: | 9.54 MB |
Show table of contents
Read manual
Document Outline
- Contents
- 1 Security
- 2 Administrator Operations
- 2.1 Accessing the Administrator Settings
- 2.2 Enhancing the Security Function
- 2.3 Preventing Unauthorized Access
- 2.4 Canceling the Operation Prohibited State
- 2.5 Setting the Authentication Method
- 2.6 System Auto Reset Function
- 2.7 User Setting Function
- 2.8 Account Track Setting Function
- 2.9 User Box Function
- 2.10 Changing the Administrator Password
- 2.11 Protecting Data in the HDD
- 2.12 Overwrite All Data Function
- 2.13 SSL Setting Function
- 2.14 S/MIME Communication Setting Function
- 2.15 SNMP Setting Function
- 2.16 TCP/IP Setting Function
- 2.17 NetWare Setting Function
- 2.18 SMB Setting Function
- 2.19 AppleTalk Setting Function
- 2.20 E-Mail Setting Function
- 3 User Operations
- 3.1 User Authentication Function
- 3.2 Change Password Function
- 3.3 Secure Print Document Function
- 3.4 User Box Function
- 4 Application Software
- 4.1 PageScope Data Administrator
- 4.2 PageScope Box Operator
- 4.3 PageScope Job Spooler
- 4.4 HDD TWAIN driver
- 4.5 PageScope Direct Print
- 4.6 HDD Backup Utility
| Recognized languages: | English |
|---|---|
| Pages: | 118 |
| Size: | 1.87 MB |
Show table of contents
Read manual
Document Outline
- Contents
- 1 Before use
- 2 Using copy functions
- 2.1 General copy operation
- 2.2 Selecting a Color setting
- 2.3 Selecting the Paper settings
- 2.4 Specifying a Zoom setting
- 2.5 Selecting document and copy settings
- 2.6 Selecting a combined copy setting
- 2.7 Selecting Finishing settings
- 2.8 Selecting not to rotate the image
- 2.9 Selecting the quality of the document
- 2.10 Selecting the density settings
- 2.11 Selecting the Paper settings
- 2.12 Scanning the next document to be copied while a copy job is being printed (next job reservation)
- 2.13 Pausing scanning/printing
- 2.14 Printing a proof to check the settings (Proof Copy)
- 3 Using fax/scan functions
- 4 Logging on and logging off
| Recognized languages: | English |
|---|---|
| Pages: | 295 |
| Size: | 10.61 MB |
Show table of contents
Read manual
Document Outline
- Contents
- Introduction
- Special Notice to User
- Available features
- Confirming whether the original is scanned or not
- Sending after erasing shadows
- Specifying a scanning area size on the original
- Sending originals of different sizes with one operation
- Sending an original with fold lines
- Sending long originals
- Sending double-paged originals
- Specifying the binding position of double-sided originals
- Sending after adjusting the density of background color
- Sending after emphasizing character edges
- Sending a color fax
- Prohibiting the print out of received originals (Memory RX function)
- Explanation of manual conventions
- Descriptions of original documents and paper
- User’s guides
- 1 Before use
- 2 Transmission
- 2.1 General fax operation (Internet Fax)
- 2.2 General fax operation (IP Address Fax)
- 2.3 Loading the original
- 2.4 Specifying transmission color settings (IP Address Fax)
- 2.5 Specifying the scan conditions
- 2.6 Specifying only one destination
- Specifying from registered destination
- Searching the registered destination (Search text button)
- Searching the registered destination (Address Type)
- Searching the registered destination (Detail Search)
- Specifying by direct input
- Performing an LDAP search (Search)
- Performing an LDAP search (Advanced Search)
- 2.7 Specifying multiple destinations (broadcast transmission)
- 2.8 Send a fax with Program destination
- 2.9 Checking the settings
- 2.10 Operations while scanning
- 2.11 When unable to send fax
- 2.12 Reserving the transmission
- 2.13 Stopping the transmission
- 2.14 Checking the transmission reservation job
- 2.15 Checking the communication result
- 2.16 Fax Header Settings
- 2.17 Faxing after previewing
- 3 Reception
- 4 Troubleshooting
- 5 Specifications
- 6 Useful transmission functions
- 6.1 List of functions on the Settings screen
- 6.2 Sending a fax after adjusting the density of background color (Background Removal)
- 6.3 Sending the fax after accentuating the text edges (Sharpness)
- 6.4 Sending the fax after erasing shadows (Frame Erase)
- 6.5 Sending double-paged originals page by page from right to left (Book Copy)
- 6.6 Sending a fax with the specified original scanning area (Scan Size)
- 6.7 Copying the original at the same time as sending the Fax (Send & Print)
- 6.8 Confirming that the original is scanned (TX Stamp)
- 6.9 Sending a fax after specifying the filename of the scanned data (Document Name)
- 6.10 Sending an original of varying sizes by a single operation (Mixed Original)
- 6.11 Sending an original with folds (Z-Folded Original)
- 6.12 Sending a long original (Long Original)
- 6.13 Specifying the binding position (Binding Position)
- 6.14 Faxing by reducing the effect of dust from the left partition glass (Despeckle)
- 6.15 Sending the fax after reconfirming the destination (Destination Check Display Function)
- 6.16 Sending a fax after specifying the E-mail Subject or Body (E-mail settings)
- 6.17 Specifying the way of adding the transmission source information (Fax Header Settings)
- 7 Useful reception functions
- 8 Registering/Settings
- 9 Utility mode
- 9.1 Utility mode operation
- 9.2 Utility mode list
- User Settings > Custom Display Settings > Fax/Scan Settings
- User Settings > Custom Display Settings > FAX Active Screen
- User Settings>Custom Display Settings>Search Option Settings
- User Settings > Scan/Fax Settings > Default Scan/Fax Settings
- Administrator Settings > System Settings > Power Save Settings
- Administrator Settings > System Settings > Restrict User Access > Restrict Access to Job Settings > Registering and Changing Address
- Administrator Settings > System Setting > Restrict User Access > Restrict Operation > Restrict Broadcasting
- Administrator Settings > System Settings > Reset Settings > Job Reset > Next Job > Reset Data After Job
- Administrator Settings > System Settings > Stamp Settings
- Administrator Settings > Administrator/Machine Settings > Administrator Registration
- Administrator Settings > Administrator/Machine Settings > Input Machine Address
- Administrator Settings > User Authentication/Account Track > Limiting Access to Destination
- Administrator Settings > Network Settings > TCP/IP Settings
- Administrator Settings > Network Settings > E-Mail Settings > E-Mail TX (SMTP)
- Administrator Settings > Network Settings > E-Mail Settings > E-Mail RX (POP)
- Administrator Settings > Network Settings > Network Fax Settings > Network Fax Function Settings
- Administrator Settings > Network Settings > Network Fax Settings
- Administrator Settings > Fax Settings > Header Information
- Administrator Settings > Fax Settings > Header/Footer Position
- Administrator Settings > Fax Settings > Line Parameter Settings
- Administrator Settings > Fax Settings > TX/RX Settings
- Administrator Settings > Fax Settings > Function Settings > Function ON/OFF Setting
- Administrator Settings > Fax Settings > Function Settings > Memory RX Settings
- Administrator Settings > Fax Settings > Report Settings
- Administrator Settings > Fax Settings > Network Fax Settings
- Administrator Settings > Fax Settings > Job Settings List
- Administrator Settings > Security Settings > Security Details > Manual Destination Input
- Administrator Settings > Security Settings > Security Details > Restrict Fax TX
- Administrator Settings > Security Settings > Security Details > Hide Personal Information
- Administrator Settings > Security Settings > Security Details > Display Active Log
- 9.3 Setting the initial state of Fax/Scan screen (Scan/Fax Settings)
- 9.4 Setting the screen during fax operation (FAX Active Screen)
- 9.5 Specifying differentiation of uppercase/lowercase letters when searching destinations (Search Option Settings)
- 9.6 Setting initial setting value of fax function (Default Scan/Fax Settings)
- 9.7 Specifying the power save transition conditions (Enter Power Save Mode)
- 9.8 Specifying the prohibitions to cause a change in destination registration (Registering and Changing Address)
- 9.9 Setting prohibitions for sending to multiple destinations (Restrict Broadcasting)
- 9.10 Specifying whether to reset the destination and settings (Reset Data After Job)
- 9.11 Specifying stamp printing specifications (Stamp Settings)
- 9.12 Protecting the destination information (Limiting Access to Destinations)
- 9.13 Registering E-mail address of administrator (Administrator Registration)
- 9.14 Registering E-mail address of this machine (Input Machine Address)
- 9.15 Setting TCP/IP (TCP/IP Settings)
- 9.16 Specifying E-mail transmission settings (E-Mail TX (SMTP))
- 9.17 Specifying E-mail reception settings (E-Mail RX (POP))
- 9.18 Validating Network Fax function (Network Fax Function Settings)
- 9.19 Specifying SMTP transmission and reception settings (Network Fax Settings)
- 9.20 Registering transmission source name and fax number (Header Information)
- 9.21 Specifying the method of setting the transmission source/reception information (Header/Footer Position)
- 9.22 Specifying Transmission/Reception Mode (Line Parameter Settings)
- 9.23 Settings of transmission and reception mode (TX/RX Settings)
- 9.24 Specifying Function ON/OFF Settings (Function ON/OFF Setting)
- 9.25 Specifying memory reception settings (Memory RX Settings)
- 9.26 Specifying Report Printing Methods (Report Setting)
- 9.27 Specifying Network Fax function settings (Network Fax Settings)
- 9.28 Prohibiting the direct input of fax number (Manual Destination Input)
- 9.29 Prohibiting the fax sending function (Restrict Fax TX)
- 9.30 Specifying settings such that fax number cannot be displayed (Hide Personal Information)
- 9.31 Specifying settings such that communication history cannot be displayed (Display Activity Log)
- 10 Reports and Lists
- 10.1 Report/List Types
- 10.2 Activity Report
- 10.3 TX Result Report
- 10.4 Broadcast Report
- 10.5 Internet Fax RX Error Report
- 10.6 Print MDN Message
- 10.7 Print DSN Message
- 10.8 Print E-Mail Message Body
- 10.9 Speed Dial List (Address Book destination list)
- 10.10 Group Address List
- 10.11 Program List
- 10.12 Title/Text List
- 10.13 Fax Setting List
- 11 Appendix
- 12 Index
| Recognized languages: | English |
|---|---|
| Pages: | 165 |
| Size: | 6.93 MB |
Show table of contents
Read manual
Document Outline
- Introduction
- 1 Overview
- 2 User mode
- 3 Administrator mode
- 3.1 Maintenance tab
- Meter Count
- ROM Version
- Import/Export
- Status Notification Setting
- Total Counter Notification Setting
- Machine Setting
- Online Assistance
- Date/Time Setting - Manual Setting
- Date/Time Setting - Time Adjustment Setting
- Timer Setting - Power Save Setting
- Timer Setting - Weekly Timer Setting
- Network TWAIN
- Reset - Network Setting Clear
- Reset - Reset
- Reset - Format All Destination
- External Memory Function Settings
- Header/Footer Registration
- License Settings - Get Request Code
- License Settings - Install License
- 3.2 Security tab
- Authentication - User Auth/Account Track
- Authentication - External Server Registration
- Authentication - Default Function Permission
- User Registration
- Registering a user
- Account Track Registration
- Registering an account
- SSL/TLS Setting - SSL/TLS Setting
- Creating a certificate
- Creating a certificate
- Specifying an encryption level setting
- Removing a certificate
- Specifying the modes using SSL
- Downloading certificates
- SSL/TLS Setting - Action for Invalid Certificate
- Address Reference Setting - Reference Allowed Group Registration
- Address Reference Setting - Public User Reference Setting
- Permission of Address Change
- Auto Logout
- Administrator Password Setting
- 3.3 Box tab
- 3.4 Print Setting tab
- 3.5 Store Address tab
- 3.6 Network tab
- TCP/IP Setting - TCP/IP Setting
- TCP/IP Setting - IP Filtering
- TCP/IP Setting - IPsec
- E-mail Setting - E-mail RX (POP)
- E-mail Setting - E-mail TX (SMTP)
- E-mail Setting - S/MIME
- E-mail Setting - I-Fax Advanced Setting
- LDAP Setting - LDAP Setting
- LDAP Setting - Setting Up LDAP
- IPP Setting
- FTP Setting - FTP TX Setting
- FTP Setting - FTP Server Setting
- SNMP Setting
- SMB Setting - WINS Setting
- SMB Setting - Client Setting
- SMB Setting - Print Setting
- SMB Setting - Direct Hosting Setting
- Web Service Settings - Web Service Common Settings
- Web Service Settings - Printer Settings
- Web Service Settings - Scanner Settings
- Bonjour Setting
- NetWare Setting - NetWare Setting
- NetWare Setting - NetWare Status
- AppleTalk Setting
- Network Fax Setting - SMTP TX Setting
- Network Fax Setting - SMTP RX Setting
- WebDAV Settings - WebDAV Client Settings
- WebDAV Settings - WebDAV Server Settings
- OpenAPI Setting
- TCP Socket Setting
- 3.1 Maintenance tab
- 4 Appendix
- 5 Index