Document Outline

• IMPORTANT NOTICE
• [For U.S. and Canadian models]
• [For Canadian model]
• IMPORTANT 1
• Cij) PIOIMEER*
  • IMPORTANT 2
    • FOR USE IN THE UNITED KINGDOM
• SAFETY INSTRUCTIONS
  • Information to User
  • [For Canadian model]
    • This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
  • [Pour le modèle Canadien]
    • L'interférence, radioélectrique générée par cet appareil numérique de type B ne dépasse pas les limites énoncées dans le Règlement sur les perturbations radioélectriques, section appareil numérique, du Ministère des Communications.
    • To establish a safe level:
    • Once you have established a comfortable sound level:
  • We Want You Listening For A Lifetime
    • Decibel
    • Level Example
    • THE FOLLOWING NOISES GAN BE DANGEROUS UNDER CONSTANT EXPOSURE
  • MAINTENANCE
  • INSTALLATION
    • When installing the deck, avoid locations with high temperatures or humidity, and make sure that the deck receives adequate ventilation.
    • CONDENSATION
    • CLEANING THE HEADS, PINCH ROLLERS AND CAPSTANS
    • DEMAGNETIZING THE HEADS
    • CLEANING THE FRONT PANEL
  • HANDLING CASSETTE TAPES
    • CHECK CASSETTE BEFORE USE
      • Is the tape loose, or is some of the tape outside the cassette?
      • Are the accidental erasure prevention tabs intact?
    • AUTOMATIC TAPE SELECTOR FUNCTION
  • CONNECTIONS
    • Connection
    • CONTROL IN jack
    • CONTROL OUT Jack
  • FRONT PANEL FACILITIES
    • REVERSE MODE SWITCH (REV MODE)
      • One way mode position
      • Two way mode position
      • Repeat modeposition (RELAY/SKIP)
      • Selecting DECK I
      • Switching to DECK II
    • FUNCTION DISPLAY
      • 0 DECK I counter indicator
      • ® DOLBY NR B/C/S indicator ® Level meter
      • 0 CD*DECK SYNCHRO indicator (CD SYNC)
      • ® DECK I tape transport mode indicators
      • ® FLEX (1/f) indicator
      • 0 Synchro copy indicator (COPY)
      • ® AUTO BLE indicator
      • ® DECK II counter indicator
      • ® DECK II tape transport mode indicators
    • DOLBY NR & DOLBY HX PRO
      • ■ The B/C-type Dolby NR Systems
      • ■ Dolby S-type NR System
      • ■ Dolby HX PRO Headroom Extension System
    • TAPE TRANSPORTATION MODE INDICATORS
    • TWO MODES COUNTER
      • Counter mode button (TIME/COUNT)
      • ■ Tape counter
      • ■ Time counter
      • Counter reset button (RESET)
  • REMOTE CONTROL OPERATION (CT-W803RS only)
    • REMOTE CONTROL OPERABLE RANGE
      • 0 Counter buttons (COUNTER)
      • (2) DECK II operation buttons
      • 0 DECK I operation buttons
      • 0 POWER button
    • REPLACING BATTERIES
    • Incorrect use of batteries may load to leakage or rupture. Always be sure to follow these guidelines:
      • A.
      • B.
      • C.
  • PLAYBACK
    • SINGLE PLAYBACK (Either DECK I or DECK II)
      • To stop playback temporarily (Except for DECK I of CT-W603RS)
      • To stop playback
      • To stop playback temporarily (Except for DECK I of CT-W603RS)
      • To stop playback
        • PLAYBACK
    • PLAYBACK SEQUENCE WITH REV MODE SWITCH SETTING
    • MUSIC SEARCH
      • During forward playback
      • During reverse playback
      • From the stop mode
      • How selections are counted
    • ERASING A TAPE
      • 1. Set the REC LEVEL control to the MIN position.
      • 2. Press the recording (•) button.
      • 3. Press the piayback (^or '4) button or the pause (II) button.
    • AUTO RLE TUNING
    • When tuning DECK II (or I).
      • 1. Load a tape in DECK II (or I).
      • 2. Set the REV MODE switch to or =>.
      • 3. Press the BLE button of DECK II (or I).
    • When tuning both decks in sequence (except for CT-W603RS)
      • 1. Load tapes in both decks.
      • 2. Set the REV MODE switch to (RELAY/SKIP).
      • 3. Press the BLE button of DECK I.
    • To stop AUTO BLE tuning
    • To reset a tuned condition
    • Error dispiay
    • The following illustrates the operation:
    • RELAY RECORDING SEQUENCE WITH REVERSE MODE SWITCH SETTING
      • To stop recording temporarily
      • To stop recording
      • 1. Load a compact disc in the CD player.
      • 2. Load the cassette for recording.
      • 3. Set the REV MODE switch.
      • 4. Set the DOLBY NR ON/OFF switch and set the DOLBY NR switch.
      • 5. Press the play button of the CD player.
      • 6. Adjust the recording level.
      • 7. Press the stop (■) button of both the cassette deck and the CD player.
      • 8. Press the CD SYNC button.
    • ABOUT RECORDING
      • When the compact disc finishes playing:
      • When the CD piayer changes discs (twin tray or muiti-play disc CD piayers):
      • When the end of the tape is reached whiie the CD player is still playing;
      • If the auto-reverse function operates while the CD is still playing:
  • TAPE COPYING (from DECK I to DECK II)
    • 1. Load a tape for playback into DECK I and a tape for recording into DECK II.
    • 2. Set the REV MODE switch.
    • 3. Set the tape transport direction.
    • 4. Press the SYNCHRO COPY button to select either NORMAL or HiGH speed.
    • To stop copying
  • TROUBLESHOOTING
    • TROUBLESHOOTING
    • POWER-CORD CAUTION
  • SPECIFICATIONS
    • About the Demo mode
      • Printed in Malaysia <rrbii43-a.