G56 2-channel power amplifier, Outline specifications – Meridian Audio G56 User Manual

Page 2

Advertising
background image

amplifiers feature active bias control throughout,
with thermal sensing that carefully manages
the temperature and current flow at different
volume levels.

Fully DC-coupled, the signal path contains no
capacitors, while those in the power supplies are
audiophile grade components.

The amplifiers are of a unique low-feedback
design for minimum transient and interface dis-
tortion, offering superb clarity and transparency
right across the audible range, with an output
impedance that is close to zero and suitable
for virtually any high-quality third-party passive
loudspeaker system.

Trigger capability allows the G56 to be switched
on remotely by means of a signal from your pre-
amp. Trigger and other control signals are opti-
cally isolated from the amplifier itself. When in
stand-by mode, a standing voltage is maintained
on the power rails and supply components. As a
result, you do not have to wait for half an hour
after switching on for optimum performance to
be achieved: it is there immediately.

Two sets of outputs are provided per chan-
nel for bi-wiring, etc, on sturdy binding posts
colour-coded for easy reference and capable of
handling large-diameter high-quality loudspeak-
er cables. The output terminals are connected to

the amplifiers by Van den Hul silver-strand cable
to avoid signal losses.

The amplifier can be operated in bridge mode
by actuating a switch on the rear panel, in
which case the left channel input becomes the
input for the bridged pair and the inner output
terminals are bridged, power being derived
from the outer terminal pairs (see rear panel
diagram).

The amplifiers include electronic protection
reset by power-cycling, with full DC and thermal
protection.

A front-panel indicator shows when the ampli-
fier is in standby. When the unit is activated, an
LED illuminates for each channel. In the event of
thermal overload, the main indicator goes red
and the channel lights go out, showing that the
unit is off-line. A pushbutton on the front panel
can be used to take the unit in and out of stand-
by, while flexible 5–30V AC/DC trigger capability
allows amplifier power to be controlled remotely
along with the rest of a system.

Outline Specifications

Power Output:

2 channels at 100W into 8Ω, or 1 channel at >300W

into 8Ω (bridge mode)

Distortion:

Less than 0.01% input to output

Signal/Noise:

Better than –100dB

Inputs:

Balanced on XLR-3F connectors and unbalanced on
phono

Outputs:

2 output sets per channel, terminal posts

Construction:

4 pairs of 15amp output devices per channel, and a
total of 27,200µF of audiophile-grade PSU smooth-
ing capacitors (2 per channel). Ultra low impedance
error-corrected output stage. DC coupled, with no
capacitors in the signal path. Soft start and thermal
management in main assembly. Optimised magnetic
design based on DSP8000. Meridian black or silver
finish in metal & glass

Dimensions:

Width: 440mm (17.32in); Depth: 350mm (13.78in)
plus connectors; Height: 90mm (3.54in)

Rack Mounting:

Kit available from Meridian authorized dealers

Weight:

13.5 kg (29.7 lbs)

Controls:

Rear-panel power switch; per-channel switches for
balanced or single-ended input; Bridge/Stereo mode
switch

Trigger:

Wide voltage-range (5–30V, AC/DC) trigger input for
remote standby/on switching

Display:

Power/Fault indicator and per-channel operation
LEDs

Power:

Versions: 100, 110, 115, 220, 230, 240 Vac, 50/60Hz.
Standby 11VA, Idle 45VA, Both channels driven
322.5VA

G56 rear panel

Meridian Audio Limited
Stonehill, Stukeley Meadows
Huntingdon, Cambridge PE29 6EX
UK
Tel +44 (0) 1480 445678
Fax +44 (0) 1480 445686

Meridian America Inc
3800 Camp Creek Parkway
Building 2400 Suite 122
Atlanta GA 30331 USA
Tel +1 (404) 344 7111
Fax +1 (404) 346 7111

Email: [email protected]
Web: www.meridian-audio.com

G56 2-Channel Power Amplifier

Information contained in this data sheet is

correct as far as possible, but Meridian Audio

accepts no liability for errors or omissions.

Trademarks are the property of their respective

owners. Meridian Audio reserves the right to

amend product specifications at any time.

Further technical details, images, product

reviews and company history are available

from Meridian Audio or from our web site,

www.meridian-audio.com

©Text & images 2003 Meridian Audio Ltd.

G56DS v3.0 • 20.10.03 RE

Advertising