FUJITSU FMB AN706 - Manual (Page 48)

AN706-00040-2v0-E
47
7.1.8.4 JTAG Interface
The microcontroller board is equipped with a JTAG interface connector for software
debugging by JTAG interface.
The external appearance of the JTAG interface connector is shown in Figure 43 and the
pin assignment is given in Table 14.
JTAG Interface Connector
1 2
9 10
Figure 43 JTAG Interface Connector External Appearance
Table 14 JTAG Interface Connector Pin Assignment
Microcontroller
connection destination
I/O
(*)
Pin No. I/O
(*)
Microcontroller
connection destination
Pin No. Signal Name Pin No. Signal Name
― +3.3V ― 1 2 I/O 95 TMS
―
GND
―
3 4 I 93 TCK
― GND ― 5 6 O 96 TDO
― GND ― 7 8 I 94 TDI
― GND ― 9 10 I 43 RESET
* I/O as seen from the microcontroller.