Fujitsu Siemens Computers V40-1 - Manual (Page 37)

MYRICA V40-1
A26361-K1070-Z120-1-M119, edition 1 English - 35
VESA-DDC-compatible VGA interface
Your LCD TV is equipped with a VESA-DDC-compatible VGA interface and a DVI-D interface.
VESA-DDC (Video Electronics Standard Association, Display Data Channel) is used as the
communications interface between the LCD TV and the computer. If your computer is equipped with
a VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring optimum
operation from your LCD TV and select the appropriate settings.
Preset operating modes (PC)
The following are the most frequently used of the preset operating modes:
Resolution Refresh rate
640 x 350
640 x 480
800 x 600
1024 x 768
1280 x 720
1280 x 768
1280 x 1024
70 Hz
60 Hz, 72 Hz, 75 Hz
56 Hz, 60 Hz, 72 Hz
60 Hz, 70 Hz, 75 Hz
60 Hz, 75 Hz
60 Hz, 75 Hz
60 Hz
Power consumption
To save energy when the device is temporarily not in use, the LCD TV can be switched into the
standby mode with the remote control (POWER button) or the STANDBY button.
Switched on Standby mode
Power indicator lights green lights red
Function Device operates normally the screen is dark
Power consumption normal < 320 W reduced to < 3 W
i
If the device is switched into the standby mode, a power consumption of up to 3 W is
maintained to enable operation with the remote control.
To completely switch off the power consumption, switch off the device with the ON/OFF
switch (see "Switching LCD TV on/off")..