GPX KC220S - Manual (Page 10)

GPX | KC220S 10
Loading a CD
Playing the Radio
Playing a CD
Programming a CD
1 Press the POWER button to turn the
under cabinet music system on.
2 Press the SOURCE button to switch
to CD MODE.
CD MODE is indicated on the display
by two blinking dashes “ - -”, and
eventually track numbers.
3 Press the OPEN/CLOSE button to
open the CD drawer.
4 Load a CD into the CD drawer, label
side facing up.
1 Press the POWER button to turn the
under cabinet music system on.
2 Press the SOURCE button to switch
to RADIO MODE.
RADIO MODE is indicated by “AM” or
“FM” on the display.
3 Press the STOP button to switch
between AM and FM radio.
4 Turn the TUNING dial on the side of
the under cabinet music system to
tune the AM or FM radio.
1 Follow the instructions for LOADING
A CD.
2 After the power is on, the music
system is in CD MODE, and the CD
is loaded, press the PLAY/PAUSE
button to begin playing a loaded CD.
1 Follow the instructions for LOADING
A CD.
2 After the power is on, the music
system is in CD MODE, and the CD is
loaded, press the STOP button.
3 Press the PROG/CLKSET button.
“01”, indicating the current program
track, will begin flashing on the
display.
4 Press the SKIP/SEARCH buttons to
select the CD track you would like to
play in the program.
5 Press the PROG/CLKSET button.
6 Repeat steps 3, 4, and 5 to continue
programming CD tracks.
Up to 20 tracks can be programmed.
7 Press the PLAY/PAUSE button to
begin playing the programmed CD.
8 To cancel a program, press the STOP
button twice.
CD AND RADIO