Grandstream Networks GXE502X - Manual (Page 11)

GXE502X User Manual 7/9/2008
11
Version 03
Line Call Control:
The following Line Call Control settings allow you to specify how inbound and outbound
calls are handled. The FXO trunk(s) will begin to work ONLY after these fields are
configured.
• Line: This field lets you specify a single line or a range of FXO port(s) for the rules to
apply to.
• Dial Prefix: Lets you configure the dial prefix on outbound calls to specified trunk(s).
When the call is sent out via this trunk, the prefix digit will be removed.
• Inbound Call Answer: In the first drop-down box of each row, select the destination for
inbound call termination on the corresponding FXO trunk(s). The second drop-down
box lets you select from the available destinations for the type selected. You can
choose from the following types: Auto-Attendant, Extensions, and Hunt/Ring Groups.
• Enable Password: Enabling this field will password protect the trunk, you must enter the
password when calling out using a trunk that has this feature enabled.
• Delete: Deletes an existing line call control rule.
• Add: Allow another line call control rule to be configured.
• Allow Other Peer Systems Use: Allows peered GXE502X(s) to dial through the local
GXE502X(s) internal PSTN trunks.
When finished, click on the Submit button to save the changes or Cancel to discard the
changes.
- Internal Phone/Fax Port: