Grundig GUDB20USB3 - Manual (Page 4)

6
Connecting up 03
7
Getting started 04
Install batteries in remote
Remove the battery cover. Insert two size AA
batteries so that the ‘+’ and ‘-’ marks on the
batteries match the ‘+’ and ‘-’ marks inside the
unit. Replace the battery cover.
Getting connected
TV
Aerial lead
RF cable
SCART cable
Connecting to the TV with SCART
Other connections
TV
DVD/RECORDER
Connecting to the TV and DVD recorder with SCART
RF cable
RF cable*
SCART cable*
SCART cable
Aerial lead
1
2 Plug in and switch on
Insert the Digital Box mains plug into a mains socket. The standby light on the front
will come on. Switch your TV on.
3 Using your digital box for the first time
Press [�] on the remote control. The green
power light should light up on the front panel of
the digital box.
Press [OK] on your remote control to begin
searching for digital channels.
If you cannot see the picture, go to the trouble
shooting section of this guide.
You will then be asked to select your television
type – normal or wide screen.
Use [t] and [u] to select.
Press [OK] to accept.
If your aerial has been correctly inserted.
Press [OK] to continue. 1.
2.
3.
* Not included in the box