GN Netcom GN7170 - Manual (Page 15)

15
8. Display messages and sound signals
8.1 Display messages table
Display message Meaning
INCOMPLETE DATA
Caller information has been interrupted during transmission or the
phone line is excessively noisy.
ENTER NAME
Prompt telling you to enter the name for one of the 10 memory loca-
tions.
ENTER TEL NUMBR
Prompt telling you to enter the telephone number for one of the 10
memory locations.
DELETE?
Prompt asking you if you want to erase Caller ID records or one of the
10 numbers stored in the GN 7170’s outbound memory.
DELETE ALL? Prompt asking you if you want to erase all Caller ID records.
DELETED Prompt confirming the Caller ID/Memory record is erased.
END OF LIST Indicates that there is no additional information in the Caller ID.
NEW Indicates call or calls have not been reviewed.
UNKNOWN NAME/
CALLER/NUMBER
The incoming call is from an area not services by Caller ID or the infor-
mation was not sent.
PAGING Someone has pressed the page button on the base.
BLOCKED CALL The person’s name is blocked from transmission.
REPT
Repeat call message. Indicates that a new call from the same number
was received more than once.
NO DATA No Caller ID information was received.
EMPTY Indicates a memory location is vacant.
NO CALLS Indicates no CID records have been stored.
MESSAGE WAITING Indicates a message is available.
MESG WAITING OFF Indicates a message is deactivated
PRESS TALK KEY
Prompt indicating the Caller ID number is a direct dial number (DDN)
that can not be formatted.
UNABLE TO DIAL Indicates the Calling number is incomplete and can not be dialed out.
8.2 Sound signals table
Sound signal Meaning
A long warbling tone (with ringer on). Signals an incoming call.
Two long beeps. Confirmation tone.
One short and one long beep. Page signal.
One short beep every 7 seconds. Low battery warning.
Three short beeps. Error tone.
GN7170_userguide.ind 15 13/08/04 9:56:09