Starline cable simulators – Motorola BT100 User Manual

Page 30

Advertising
background image

Amplifier

Setup

3-5

BT100 Installation and Operation Manual

When selecting an equalizer, choose the next lower value if the exact value is not available or in

cases where the calculated value makes two choices possible.

To determine the proper cable for bench testing, subtract the interstage equalizer value (14 dB)

from the cable connected to its input. The output is flat with a flat signal source.
Because of errors in cable attenuation, slope in passive devices, and other independent
variables, you may need to change the final value of the equalizer before you install the BT100.

STARLINE Cable Simulators

STARLINE cable simulators, model SCS-*, are used in place of fixed equalizers in systems

where: (1) the amplifiers are located close together, (2) there are large amounts of flat loss from

passive components, or (3) it is necessary to compensate for reverse cable tilt. The simulators fit
in the same location as the equalizers.
Table 3-2 and Figure 3-2 help you choose the correct simulators:

Table 3-2
Starline cable simulators

SCS-*

1 2 3 4 5 6 7 8 9 10

Frequency

Cable slope in dB

40 MHz

0.0 0.1 0.1 0.1 0.2 0.2 0.3 0.3 0.3 0.4

45 MHz

0.0 0.0 0.1 0.1 0.1 0.1 0.1 0.1 0.2 0.2

50 MHz

0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0

72 MHz

-0.1 -0.2 -0.2 -0.3 -0.4 -0.4 -0.5 -0.6 -0.7 -0.7

108 MHz

-0.1 -0.3 -0.4 -0.5 -0.6 -0.8 -0.9 -1.0 -1.2 -1.3

150 MHz

-0.2 -0.5 -0.7 -0.9 -1.2 -1.4 -1.6 -1.9 -2.1 -2.3

211 MHz

-0.3 -0.7 -1.0 -1.4 -1.7 -2.1 -2.4 -2.8 -3.1 -3.5

250 MHz

-0.4 -0.8 -1.2 -1.7 -2.1 -2.5 -2.9 -3.3 -3.7 -4.1

300 MHz

-0.5 -1.0 -1.5 -1.9 -2.4 -2.9 -3.4 -3.9 -4.4 -4.9

350 MHz

-0.6 -1.1 -1.7 -2.2 -2.8 -3.3 -3.9 -4.4 -5.0 -5.5

400 MHz

-0.6 -1.2 -1.8 -2.5 -3.1 -3.7 -4.3 -4.9 -5.5 -6.2

450 MHz

-0.7 -1.4 -2.0 -2.7 -3.4 -4.1 -4.7 -5.4 -6.1 -6.8

550 MHz

-0.8 -1.6 -2.4 -3.2 -4.0 -4.8 -5.5 -6.3 -7.1 -7.9

750 MHz

-1.0 -2.0 -3.0 -4.0 -5.0 -6.0 -7.0 -8.0 -9.0 -10.0

870 MHz

-1.1 -2.2 -3.3 -4.4 -5.5 -6.7 -7.8 -8.9 -10.0

-11.1

1003 MHz

-1.2 -2.5 -3.7 -4.9 -6.2 -7.4 -8.7 -9.9 -11.1

-12.4

50 MHz loss (typical)

-1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0

Advertising