Connection, Fl off standby fl off standby – Marantz VP-15S1 User Manual
Page 17
![background image](/manuals/114320/17/background.png)
9
ENGLISH
CONNECTION
❖
When making connections be sure to:
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Securely insert the plug into the port to connect cables. Loose cables can lead to trouble and damage.
❖
When pulling out a cable:
• Be sure to grab the plug, not the cable itself.
Connect the supplied AC power cord into the AC IN socket of the projector.
The STANDBY indicator lights up and the projector goes into the standby mode.
Note :
Make sure the AC power cord is firmly connected into the AC IN socket.
Connection with AC Power Supply
FL OFF
STANDBY
FL OFF
STANDBY
S-VIDEO OUT
VIDEO OUT
COMPONENT VIDEO OUT
COMPONENT VIDEO OUT
Component cable
(commercially available)
DVD Player
DVD Player
VCR
S-video cable (commercially available)
Video cable
(commercially available)
Component cable
(commercially available)
You can connect this projector to a VCR, DVD player and other video equipment.
Connecting a video source using S-VIDEO IN and VIDEO IN terminals.
1.
Connect one of the S-video cable to the S-VIDEO IN terminal, or one end of the video cable to the VIDEO
IN terminal on the projector.
2.
Connect the other end of the S-video cable or the video cable to the S-video output terminal or video
output terminal of the video source.
Connecting a DVD player to the COMPONENT VIDEO IN 1 or 2 terminal
(Devices can be connected to both terminals at the same time.)
1.
Connect the individual terminals of the component video cable into the COMPONENT VIDEO IN 1 or 2
terminal of the projector.
2.
Connect the other end of the cable to the corresponding terminals on a DVD player.
Connection with Video Equipments
VARO
Laite on liitettava suojamaadoitus-koskettimilla varustettuun pistorasiaan.
SUOMI
FORSIKTIG
Apparatet ma tilkoples jordet stikkontakt.
KONGERIKET NORGE
OBSERVERA
Apparaten skall anslutas till jordat uttag.
SVENSKA