Marantz VP-11S1 - Manual (Page 31)

23
ENGLISH
– Gamma setting
To change the type of Gamma curve, set the Picture Mode (
☞
p.22) to User (1 – 9). Select “Gamma”
from the displayed menu followed by the desired gamma curve (A, B, C, D, E, Theater, Standard or
Dynamic).
– Color Temp. (Color Temperature)
1 : Red comes out strong. Color temperature is about 5250 K.
2 : Red is mildly strong. Color temperature is about 5800 K.
3 : Normal. Color temperature is about 6500 K.
4 : Blue is mildly strong. Color temperature is about 7500 K.
5 : Blue comes out strong. Color temperature is about 9300 K.
HB : High Bright : Display brightest image.
NOTES:
- To adjust picture quality, set the index to a mode other than the default. See “Picture Mode”.
(
☞
P.22)
- The Gamma cannot be set unless User (1 - 9) is set for the Picture Mode (
☞
P.22).
- Tint cannot be adjusted for component input, HDMI input or PAL signals. For details, see “Functions
by Signal.” (
☞
P.20-21)
- The settings made in Picture Adjust are saved in the currently selected Picture Mode index.
A B C D E
Theater Dynamic
Picture quality in each of the picture modes can be adjusted to your liking and those adjustments can be
saved in memory.
User 1
Gamma
Contrast
Brightness
Color
Tint
0
0
0
3
0
Lamp Mode
Color Temp.
Normal
A
Iris F6.0
Aspect Full
C
D
E
B
A Picture Adjust
Fine Menu 1
Fine Menu 2
Input Signal
RGB/HD Adjust
Display
OSD/Blanking
Config.
Theater
Standard
Dynamic
Picture Adjust
Adjustments
A, B, C, D, E, Theater,
Standard, Dynamic
-50 Ф 0 Ф 50
(Weak) (Default) (Strong)
-50 Ф 0 Ф 50
(Dark) (Default) (Bright)
-50 Ф 0 Ф 50
(Light) (Default) (Deep)
R50 Ф 0 Ф G50
(Purple) (Default) (Green)
1 2 3 4 5 HB
(Red) (Blue)
Normal, Economy
F6.0, F3.0
Sets the lens aperture.
F6.0: Use to prioritize contrast.
F3.0: Use to prioritize brightness.
Full, Normal, Zoom, V-Stretch,
Through
Item
Gamma
Contrast
Brightness
Color
Tint
Color Temp.
(Color Temperature)
Lamp Mode
Iris
Aspect