Miele S 4000 - Manual (Page 36)

When to change the thread
catcher pads
The thread catcher pads on the bottom
of the floor tool and the upholstery tool
should be checked occasionally.
Replace the pads if they appear worn.
Replacing the thread catchers
^ Use a knife or similar object to
remove the thread catchers from the
slots.
^ Insert the new thread catchers.
Servicing the floor roller
^ Use a coin to release the roller pin
and take it out,
a.
^ Push and take out the roller axle, b.
^ Take out the roller, c.
^ Remove all threads, hair, etc. and
reassemble the parts in the reverse
order.
Spare parts are available from your
Miele dealer or from the Miele.
Maintenance and care
36