Motorola Broadband House Amplifier BHA-100K/P-R - Manual (Page 23)

3-8 Configuration and Installation
4 Carefully install the return hybrid gain block in the location shown in Figure 3-2.
The pins of the hybrid gain block are fragile and bend when forced.
5 Fasten the component with the hardware provided to complete the hybrid gain block
installation.
6 Install the SRE-* return equalizer in the location shown in Figure 3-2.
7 Install JXP-*B zero attenuation pads in the appropriate locations.
Return amplifier gain, output, and slope are controlled by discrete components. Variable
controls are not provided. Return output level is adjusted by installing fixed pads, model
JXP-*B to meet system requirements. You can control the input level by installing JXP-*B
pads. JXP-*B pads are available in values from 1 through 24 dB.
BHA-100* Broadband House Amplifier Installation Manual